2.11 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!
Serial ATA2 Connectors | SATA2_1 | SATA2_3 | ||
(SATA2_1: see p.13, | No. 14) | |||
|
| |||
(SATA2_2: see p.13, | No. 19) |
|
| |
(SATA2_3: see p.13, | No. 15) |
|
| |
(SATA2_4: see p.13, No. 16) | SATA2_2 | SATA2_4 | ||
(SATA2_5: see p.13, | No. 18) |
|
| |
|
|
| SATA2_5 | |
These five Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate.
Serial ATA3 Connectors
(SATA3_A0: see p.13, No. 7)
(SATA3_A1: see p.13, No. 8)
(SATA3_0: see p.13, No. 9)
Serial ATA (SATA) Data Cable
(Optional)
SATA3 A0 | SATA3 A1 |
| SATA3 0 |
These three Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.
Either end of the SATA data cable can be connected to the SATA / SATA2 / SATA3 hard disk or the SATA2 / SATA3 connector on this motherboard.
Print Port Header
AFD#
ERROR# |
|
| |
| PINIT# | GND |
|
| SLIN# |
| |
(see p.13, No. 26) |
|
| |
|
|
| |
| 1 |
|
|
|
| SPD7 | |
|
| SPD6 | ACK# |
|
| SPD5 | BUSY |
|
| SPD4 | PE |
| SPD3 | SLCT | |
| SPD2 |
|
|
| SPD1 |
|
|
| SPD0 |
|
|
| STB# |
|
|
This is an interface for print port cable that allows convenient connection of printer devices.
31