ASRock A75M-HVS manual Expansion Slots PCI and PCI Express Slots, Installing an expansion card

Page 16

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 1 PCI slot and 2 PCI Express slots on this motherboard.

PCI Slot: PCI slot is used to install expansion cards that have the 32-bit PCI interface.

PCIE Slots:

PCIE1 (PCIE x1 slot; White) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card and SATA2 card.

PCIE2 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width graphics cards.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

16

Image 16
Contents A75M-HVS Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Connector Bios FeatureUnique Feature Rear Panel I/OMonitor HardwareCertifications Page Page Motherboard Layout 2400+I/O Panel LAN Port LED IndicationsInstallation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Installing a DimmExpansion Slots PCI and PCI Express Slots Installing an expansion cardPcie Slots Enjoy the benefit of AMD Dual Graphics AMD Dual Graphics Operation GuideWhat does an AMD Dual Graphics system include? AMD Vision Engine Control Center Dual Monitor and Surround Display Features Dual Monitor FeatureSurround Display Feature For Windows XP / XP 64-bit OSFor Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS What is HDCP?Hdcp Function ASRock Smart Remote Installation Guide CIR sensors in different anglesJumpers Setup DescriptionOnboard Headers and Connectors Serial ATA3 ConnectorsInfrared Module Header CPU Fan Connectors Pled System Power LEDATX 12V Power Connector Please connect an ATX 12V power supply to this connectorSerial ATA3 SATA3 Hard Disks Installation What is Hot Plug Function?What is Hot Swap Function? Hot Plug and Hot Swap Functions for SATA3 HDDsSATA3 HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a SATA3 HDD Installing Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Uefi Use RAID Installation Guide to set RAID configuration \ RAID Installation Guide Make a SATA3 Driver DisketteInstalling Windows XP / XP 64-bit Without RAID Functions Page Uefi Menu Bar Navigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondOC Tweaker Screen Dram Timing Control Power Down Enable RAS# to CAS# Delay tRCDCommand Rate CR Write Recovery Time tWRRAS to RAS Delay tRRD Write to Read Delay tWTRWould you like to save current setting user defaults? Refresh Cyle Time tRFCAdvanced Screen Instant FlashCPU Configuration Core C6 ModePackage C6 Mode Cool ‘n’ QuietNorth Bridge Configuration Primary Graphics AdapterShare Memory Onboard Hdmi HD AudioSouth Bridge Configuration Onboard HD AudioFront Panel Onboard LANStorage Configuration Sata ModeSata IDE Combined Mode Sata ControllerSuper IO Configuration Acpi Configuration Acpi Hpet table USB Configuration USB 2.0 ControllerUSB 3.0 Controller Legacy USB SupportChassis Fan 1 Setting CPU Fan 1 SettingHardware Health Event Monitoring Screen Boot Screen Security Screen Exit Screen Install Operating System Support CD InformationRunning The Support CD Drivers MenuInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 232 pages 32.74 Kb