Using your dishwasher
Before first use
oInstall the appliance as per the installation instructions contained within this booklet.
o Add 1.5Kg specialist dishwasher salt to the dishwasher water softener compartment and then fill with tap water. After this you should set the water softener level.
oFill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is used in the appliance (in particular table salt), it will damage the water softener.
oIdeally you should fill the water softener with salt, just before you are about to run a wash program. This will help to clear any salt that may have overflowed from the water softener during the salt filling process.
o Open the door of the dishwasher and then remove the lower basket. The basket should be empty when you remove it.
o Turn the water softener cap anticlockwise and remove it.
o Pour salt into the water softener compartment using the funnel that is supplied with the appliance. You should add approximately 1.5 kg of salt into the water softener.
o Then pour tap water into the water softener until it fills.
oIt is perfectly normal for a small amount of water to come out of the water softener compartment.
11