Setting the rinse aid level
The amount of rinse aid that the dishwasher requires also depends on the hardness of your water. You should experiment with the rinse aid setting, until you find a level that gives the best results.
o On the first wash cycle, we would recommend that the rinse aid level is set to number 4.
oIf you get water spots and poor drying performance, then you should turn the arrow anticlockwise and increase the setting to the next number.
oYou should continue to adjust the rinse aid level upwards until you get no water spots.
oIf you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. Turn the arrow clockwise and lower the setting to the next number.
Filling with dishwasher detergent
The detergent dispenser must be refilled at the start of each wash cycle (apart from the Rinse wash program).
oOpen the lid that closes over the detergent dispenser (1) and place the detergent inside of the dispenser (2).
14