Removing the inner door glass for cleaning
oDo not use any abrasive cleaner that could cause damage.
oRemember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure.
oTo facilitate cleaning, the inner door glass can be lifted out.
Grip the top and the bottom of the inner door glass panel.
Gently pull the bottom of the inner door glass panel upwards.
Do not raise the panel more than 35° as it can damage the securing clips.
The securing clips at the top and bottom of the glass panel will pop out and the glass panel will be free to remove.
If the top securing clips do not pop out when pulling the bottom of the glass panel upwards, then pull the top of the glass panel upwards until the top also pops out.
After cleaning, insert the glass panel correctly back into the door in the reverse order. Ensure the securing clips slot back into place and the glass panel locks into place securely.
IMPORTANT: Remember where the panel of glass is removed from so you can reassemble the door correctly. Do not mix the glasses up or rearrange the order.
29