Carvin CX1272 manual Replacement Parts List for circuit cards, Description Carvin # QTY

Page 1

This symbol is intended to alert the user

 

This symbol is intended to alert the

CAUTION

to the presence of uninsulated “danger-

user to the presence of important

ous voltage” within the product’s enclo-

 

operating and maintenance (servic-

RISK OF ELECTRIC SHOCK

sure

that may be of sufficient magni-

ing) instructions in the literature

tude

to constitute a risk of electric

DO NOT OPEN

accompanying the appliance.

shock to persons.

IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polar- ization means of an appliance is not defeated.

POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SERVICING: The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type.

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth

BLUE—Neutral

BROWN—Live

U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAM-

AGED OR CUT MAIN PLUG INTO A POWER SOCKET.

LIMITED WARRANTY

Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stat- ed. Carvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer.

CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin prod- ucts. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAM- AGES.

When RETURNING merchandise to the factory, you may call for a return authori- zation number. Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT RATE for parts and labor to bring your unit up to factory specifications.

MAINTAINING YOUR EQUIPMENT

Avoid spilling liquids or allowing any other foreign matter inside the unit. The panel of your unit can be wiped from time to time with a dry or slightly damp cloth in order to remove dust and bring back the new look. As with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the mixer is adequately protected by a cover.

REPLACEMENT PARTS LIST (for circuit cards)

CAUTION

RISK OF ELECTRIC SHOCK

REFER SERVICING TO QUALIFIED SER- VICE PERSONNEL! THIS UNIT CON- TAINS HIGH VOLTAGE INSIDE!

Ref. Des.

Description

Carvin P/N

A1

Op Amp NE5532 Linear Output

60-55320

A2

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A3

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A4

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A5

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A6

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A7

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A8

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A9

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A10

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A11

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A12

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A13

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A14

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A15

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A16

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A17

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A18

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A19

Op Amp MC4558 CP1 Dual HFREQ

60-45580

A20

Op Amp MC4558 CP1 Dual HFREQ

60-45580

B6

Jumper 0Ω 0.35"

50-00035

B7

Jumper 0Ω 0.35"

50-00035

C1

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C2

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C3

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C4

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C5

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C6

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C7

Capacitor Ceramic 27PF 500 Volt 5%

45-27052

C8

Capacitor Ceramic 27PF 500 Volt 5%

45-27052

C9

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C10

Capacitor Ceramic 0.0047µF 100 Volt 10%

46-47212

C11

Capacitor Ceramic 39PF 500 Volt 5%

45-39052

C12

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C13

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C14

Capacitor Ceramic 0.047µF 100 Volt 10%

46-47212

C15

Capacitor Ceramic 0.047µF 100 Volt 10%

46-47212

C16

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C17

Capacitor Ceramic 0.047µF 100 Volt 10%

46-47212

C18

Capacitor Electrolytic 470µF 25 Volt 20%

47-47125

C19

Capacitor Electrolytic 470µF 25 Volt 20%

47-47125

C20

Not Used

 

C21

Capacitor Ceramic 680PF 500 Volt 5%

45-68152

C22

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C23

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C84

Capacitor Poly 0.068µF 100 Volt 10%

46-68312

C85

Capacitor Poly 0.0033µF 100 Volt 10%

46-33212

C86

Capacitor Poly 0.022µF 100 Volt 10%

46-22312

C87

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C88

Capacitor Ceramic 0.0047µF 100 Volt 10%

46-47212

C89

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C90

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C91

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C93

Capacitor Ceramic 0.047µF 100 Volt 10%

46-47212

C94

Capacitor Poly 0.022µF 100 Volt 10%

46-22312

C95

Capacitor Ceramic 0.1µF 100 Volt 10%

46-10412

C96

Capacitor Ceramic 0.0047µF 100 Volt 10%

46-47212

C97

Capacitor Poly 0.033µF 100 Volt 10%

46-33312

C98

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C99

Capacitor Poly 0.0068µF 100 Volt 10%

46-68212

C100

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C101

Capacitor Poly 0.0022µF 100 Volt 10%

46-22212

C102

Capacitor Ceramic 250PF 500 Volt 5%

45-25152

C105

Capacitor Poly 0.22µF 100 Volt 10%

46-22412

C106

Capacitor Poly 0.01µF 100 Volt 10%

46-10312

C107

Capacitor Poly 0.068µF 100 Volt 10%

46-68312

C108

Capacitor Poly 0.0033µF 100 Volt 10%

46-33212

C109

Capacitor Poly 0.022µF 100 Volt 10%

46-22312

C110

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C111

Capacitor Ceramic 0.0047µF 100 Volt 10%

46-47212

C112

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C113

Capacitor Ceramic 330PF 1000 Volt 10%

45-33113

C114

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

D1

LED Red small

#204HD 3mm T-1.00

60-75320

D2

LED Yellow small #204YD 3mm T-1.00

60-75340

D3

LED Red small

#204HD 3mm T-1.00

60-75320

D4

Diode Rect Gen

1N4003 1A 200V

61-40030

D5

LED Red small

#204HD 3mm T-1.00

60-75320

D6

Diode Rect Gen

1N4003 1A 200V

61-40030

D7

Diode Rect Gen

1N4003 1A 200V

61-40030

D10

LED Red small

#204HD 3mm T-1.00

60-75320

D11

Diode Rect Gen

1N4003 1A 200V

61-40030

D12

LED Red small

#204HD 3mm T-1.00

60-75320

ENC1

Rot Encoder Vert 5-bit Vert PCB MNT

25-22204

H1

10 Pin Vert SHS 2.5mm PCB MTG

23-11010

H2

8 Pin Vert SHS 2.5mm PCB MTG

23-11008

H3

4 Pin Vert SHS 2.5mm PCB MTG

23-11004

J1

Neutrik XLR Connect NL4FC FEM

21-40000

J2

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

P24

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P25

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P26

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P27

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P28

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P30

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P31

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P32

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P33

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P34

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P35

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P36

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P37

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P38

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

Q4

Transistor 2N5550 NPN 250V TO-92

60-55500

R1

Resistor 5.6K Ohm 1/4W 1% Metal

50-56231

R2

Resistor 5.6K Ohm 1/4W 1% Metal

50-56231

R3

Resistor 2.21K Ohm 1/4W 1% Metal

50-22131

R4

Resistor 2.21K Ohm 1/4W 1% Metal

50-22131

R5

Resistor 47K Ohm 1/4W 5% Carbon

50-47045

R6

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R7

Resistor 100K Ohm 1/4W 5% Carbon

50-10055

R8

Resistor 300K Ohm 1/4W 5% Carbon

50-30055

R9

Resistor 100K Ohm 1/4W 5% Carbon

50-10055

R10

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R11

Resistor 300K Ohm 1/4W 5% Carbon

50-30055

R12

Resistor 3.3K Ohm 1/4W 5% Carbon

50-33035

R13

Resistor 100K Ohm 1/4W 5% Carbon

50-10055

R14

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R15

Resistor 3.3K Ohm 1/4W 5% Carbon

50-33035

R16

Resistor 3.3K Ohm 1/4W 5% Carbon

50-33035

R17

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R18

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R19

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R20

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R21

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R22

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R23

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R24

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R25

Jumper 0Ω 0.35"

 

50-00035

R26

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R27

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R28

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R29

Jumper 0Ω 0.35"

 

51-00035

R30

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R31

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R32

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R33

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R34

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R35

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R36

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R37

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R38

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R39

Resistor 4.7K Ohm 1/4W 5% Carbon

50-47035

R40

Resistor 1K Ohm 1/4W 5% Carbon

50-10035

R41

Not Used

 

R42

Jumper 0Ω 0.35"

50-00035

R43

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R44

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R45

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R46

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R47

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R48

Resistor 470Ω 1/4W 5% Carbon

50-47025

R49

Jumper 0Ω 0.35"

50-00035

R50

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R51

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R52

Resistor 470Ω 1/4W 5% Carbon

50-47025

R53

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R54

Resistor 470Ω 1/4W 5% Carbon

50-47025

R55

Resistor 47K Ohm 1/4W 5% Carbon

50-47045

R56

Not Used

 

R57

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R58

Resistor 470Ω 1/4W 5% Carbon

50-47025

R59

Resistor 470Ω 1/4W 5% Carbon

50-47025

R60

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R62

Resistor 1K Ohm 1/4W 5% Carbon

50-10035

R63

Resistor 1K Ohm 1/4W 5% Carbon

50-10035

R64

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R65

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R66

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R67

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R68

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R69

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R70

Resistor 2.4K Ohm 1/4W 5% Carbon

50-24035

R71

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R72

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R73

Resistor 300K Ohm 1/4W 5% Carbon

50-30055

R74

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R75

Resistor 360K Ohm 1/4W 5% Carbon

50-36055

R76

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R77

Resistor 110K Ohm 1/4W 5% Carbon

50-11055

R78

Resistor 1.8K Ohm 1/4W 5% Carbon

50-18035

R79

Resistor 91K Ohm 1/4W 5% Carbon

50-91045

R80

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R81

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R82

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R83

Resistor 220K Ohm 1/4W 5% Carbon

50-22055

R84

Resistor 2.4K Ohm 1/4W 5% Carbon

50-24035

R85

Resistor 180K Ohm 1/4W 5% Carbon

50-18055

R86

Resistor 2K Ohm 1/4W 5% Carbon

50-20035

R87

Resistor 130K Ohm 1/4W 5% Carbon

5013055-

R88

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R89

Resistor 110K Ohm 1/4W 5% Carbon

50-11055

R90

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R91

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R92

Resistor 470Ω Ohm 1/4W 5% Carbon

50-47025

R93

Resistor 2.4K Ohm 1/4W 5% Carbon

50-24035

R94

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R95

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R96

Resistor 300K Ohm 1/4W 5% Carbon

50-30055

R97

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R98

Resistor 360K Ohm 1/4W 5% Carbon

50-36055

R99

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R100

Resistor 110K Ohm 1/4W 5% Carbon

50-11055

R101

Resistor 1.8K Ohm 1/4W 5% Carbon

50-18035

R102

Resistor 91K Ohm 1/4W 5% Carbon

50-91045

R103

Resistor 1K Ohm 1/4W 5% Carbon

50-10035

R104

Resistor 100K Ohm 1/4W 5% Carbon

50-10055

R105

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R106

Resistor 220K Ohm 1/4W 5% Carbon

50-22055

R107

Resistor 2.4K Ohm 1/4W 5% Carbon

50-24035

R108

Resistor 180K Ohm 1/4W 5% Carbon

50-18055

R109

Resistor 2K Ohm 1/4W 5% Carbon

50-20035

R110

Resistor 130K Ohm 1/4W 5% Carbon

50-13055

R111

Resistor 2.2K Ohm 1/4W 5% Carbon

50-22035

R112

Resistor 110K Ohm 1/4W 5% Carbon

50-11055

R113

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

R114

Resistor 150K Ohm 1/4W 5% Carbon

50-15055

R115

Resistor 470Ω Ohm 1/4W 5% Carbon

50-47025

R116

Resistor 22K Ohm 1/4W 5% Carbon

50-22045

R117

Resistor 10K Ohm 1/4W 5% Carbon

50-10045

S1

Switch DPDT Push PC MTG

25-02201

S2

Switch DPDT Push PC MTG

25-02201

S4

Switch DPDT Push PC MTG

25-02201

C24

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C29

Capacitor Ceramic 680PF 500 Volt 5%

45-68152

C30

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C31

Capacitor Ceramic 680PF 500 Volt 5%

45-68152

C32

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C33

Capacitor Ceramic 56pF 500 Volt 5%

45-56052

C34

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C35

Capacitor Ceramic 56pF 500 Volt 5%

45-56052

C36

Capacitor Ceramic 680PF 500 Volt 5%

45-68152

C37

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C38

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C39

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C41

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C42

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C44

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C45

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C46

Capacitor Ceramic 82PF 500 Volts 5%

45-82052

C47

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C48

Not Used

 

C49

Capacitor Electrolytic 10µF 50 Volt 20%

47-10051

C53

Capacitor Electrolytic 470µF 25 Volt 20%

47-47125

C54

Capacitor Electrolytic 470µF 25 Volt 20%

47-47125

C70

Capacitor Poly 0.47µF 100 Volt 10%

46-47412

C71

Capacitor Poly 0.022µF 100 Volt 10%

46-22312

C72

Capacitor Ceramic 0.1µF 100 Volt 10%

46-10412

C73

Capacitor Ceramic 0.0047µF 100 Volt 10%

46-47212

C74

Capacitor Poly 0.033µF 100 Volt 10%

46-33312

C75

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C76

Capacitor Poly 0.0068µF 100 Volt 10%

46-68212

C77

Capacitor Poly 0.001µF 100 Volt 10%

46-10212

C78

Capacitor Poly 0.0022µF 100 Volt 10%

46-22212

C79

Capacitor Ceramic 250PF 500 Volt 5%

45-25152

C82

Capacitor Poly 0.22µF 100 Volt 10%

46-22412

C83

Capacitor Poly 0.01µF 100 Volt 10%

46-10312

J3

Jack RCA QUAD PC Vertical PC MTG

21-40022

J4

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

J5

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

J6

Jack stereo 1/4" 5 Pin 24mm Plastic

21-50545

J7

Jack stereo 1/4" 5 Pin 24mm Plastic

21-50545

J8

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

J9

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

J10

Jack mono 1/4"

3 Pin 24mm Plastic

21-50345

J11

Jack mono 1/4" 3 Pin 24mm Plastic

21-50345

P1

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P2

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P3

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P4

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P5

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P6

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P7

Potentiometer B50Kx2 w/ Click D 14mm 35mm72-13069

P8

Potentiometer B50Kx2 w/ Click D 14mm 35mm72-13069

P9

Potentiometer B50Kx2 D 14mm 35mm

72-13068

P10

Potentiometer B50Kx2 D 14mm 35mm

72-13068

P12

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P13

Potentiometer B50K D Vrt 9mm 35mm w/ Bushing

71-09063

 

 

 

P20

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P21

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P22

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

P23

Fader B10K C30mm

H=.24 C1 25mm Shaft 71-10332

6

4

5

3

 

 

2

 

 

 

 

7

 

 

9

 

 

8

1

 

 

#

DESCRIPTION

 

CARVIN #

QTY

 

 

 

1.

Switch Cap Grey Extended

07-01603

 

15

 

 

 

2.

Knob 11 D shaft (COLOR)

07-120--

 

---

 

Color Knob Code

3.

Front Panel PCB (12 Chan)

30-12724

 

1

 

4.

Power Module 750Watts

80-07548

 

1

 

Red

12

 

 

Blue

36

5.

Power supply PCB

80-07548

 

1

 

6.

DSP Reverb PCB

 

 

 

1

 

Drk Grey

42

80-32203

 

 

7.

Speaker Output PCB

 

 

 

1

 

 

 

30-12524-3

 

 

 

 

8.

Circuit Breaker

70-28110

 

1

 

 

 

9.

toroid transformer 750Watts

15-75160

 

1

 

 

 

Image 1
Contents Description Carvin # QTY Replacement Parts List for circuit cardsCX Overview Internal Signal RoutingShelving EQ with Active Tone Circuits HeadroomMIC Channel Features Master Section FeaturesCX672, CX872 & CX1272 Controls Protect LED Indicator Clip IndicatorPower LED Phantom Power Switch and LEDSpeaker Connection Stereo Live Sound SystemDSP Effects Tape Decks and External EffectsStereo PA with External Monitor System Mono PA with Monitors

CX1272 specifications

The Carvin CX1272 is a versatile and powerful audio mixing console designed for various professional sound reinforcement applications. Known for its high-quality audio performance and user-friendly interface, the CX1272 is a favorite among musicians, sound engineers, and event organizers alike.

One of the standout features of the CX1272 is its 12 microphone inputs, each equipped with premium-quality preamps that deliver exceptional sound clarity and warmth. These preamps provide an impressive headroom, making them suitable for a wide range of sound sources, from vocals to instruments. Additionally, each channel includes a 3-band EQ, allowing users to sculpt their sound effectively for any performance setting.

The CX1272 is designed with flexibility in mind. It offers a total of 12 outputs, including main outputs, auxiliary sends, and sub-group outputs. This arrangement is ideal for live performances where monitoring and effects routing are crucial. The auxiliary sends are particularly useful for creating monitor mixes for performers on stage, enhancing the overall performance experience.

A significant technological feature of the CX1272 is its built-in digital effects processor. This integrated system provides a range of effects, such as reverb, delay, and chorus, which can be applied to individual channels or the main mix. This eliminates the need for external effects processors, making the CX1272 a compact and efficient solution for live sound applications.

The console also benefits from robust construction, featuring a durable chassis designed to withstand the rigors of touring and live performances. Its intuitive layout and clear labeling ensure that sound engineers can work quickly under pressure, making adjustments during performances seamlessly.

In terms of connectivity, the CX1272 includes a variety of input and output options, ensuring compatibility with a wide range of audio equipment. The XLR, TRS, and RCA inputs provide flexibility for various audio sources, while the balanced outputs minimize interference and noise for cleaner sound transmission.

Overall, the Carvin CX1272 is a powerful mixer that blends quality, flexibility, and durability. Whether for live performances, studio recordings, or event productions, its advanced features and solid construction make it a reliable choice for audio professionals. With its user-friendly design and high performance, the CX1272 continues to be a popular option for those looking to deliver outstanding sound.