Alcatel POP C2 manual Battery, Chargers, Radio Waves

Page 15

BATTERY:

Observe the following precautions for battery use:

-Do not attempt to open the battery (due to the risk of toxic fumes and burns).

-Do not puncture, disassemble or cause a short-circuit in a battery.

-Do not burn or dispose of a used battery in household rubbish or store it at temperatures above 60°C.

Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCT Mobile Limited and/or its affiliates.

This symbol on your telephone, the battery and the accessories

means that these products must be taken to collection points at the end of their life:

- Municipal waste disposal centres with specific bins for these items of equipment

- Collection bins at points of sale.

They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge.

All products with this sign must be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

CHARGERS

Mains powered chargers will operate within the temperature range of: 0°C to 40°C.

The chargers designed for your mobile phone meet with the standard for safety of information technology equipment and office equipment use. They are also compliant to the ecodesign directive 2009/125/EC. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only.

RADIO WAVES:

Specific Absorption Rate (IEEE)

THIS MOBILE PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio- frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Industry Canada, is 1.6 W/kg averaged over 1

29

gram of body tissue. Tests for SAR are conducted using standard operating positions with the mobile phone transmitting at its highest certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the actual SAR level of the mobile phone while operating can be well below the maximum value. This is because the mobile phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the mobile phone. Before a mobile phone model is available for sale to the public, compliance with national regulations and standards must be shown.

The highest SAR value for this model mobile phone when Tested is 1.02 W/kg for use at the ear and 1.36 W/kg for use close to the body.

While there may be differences between the SAR levels of various mobile phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the mobile phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.phonefacts.net

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or using “hands-free” devices to keep mobile phones away from the head and body. (fact sheet n°193). Additional WHO information about electromagnetic fields and public health are available on the following website: http://www. who.int/peh-emf.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

For other devices, they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference

(2) this device must accept any interference received, including interference that may cause undesired operation.

30

IP4909_4032D_QG_Eng_GB_India & Sri Lanka_02_140617.indd 29-30

2014-6-17 17:44:13

Image 15
Contents Keys and connectors Your mobileProtect Your Hearing Home key Power keyVolume keys Recent apps keyGetting started Installing or removing the batteryInstalling the microSD card Charging the batteryHome screen Power on your phonePower off your phone Using the touchscreenStatus icons Lock/Unlock your screen Personalize your Home screenApplication tab Using Onscreen Keyboard Text inputApplications and widgets list Phone call Messaging PeopleGPRS/EDGE/3G Connecting to the InternetWi-Fi Getting connectedConnecting to a computer BrowserSharing your phones mobile data Connection Applications Data backupFactory data reset Applications Internal storageSmart Suite UpgradeMaking the most Your phone Internal storagePrivacy Safety and useTraffic Safety Conditions of USEBattery ChargersRadio Waves Regulatory information Specific Absorption Rate IcnirpLicences Bluetooth Declaration ID B021282General information DisclaimerTroubleshooting WarrantyMy phone cannot charge properly My phone cannot be switched on or is frozenMy phone has not responded for several minutes My phone turns off by itselfHow to make your battery last longer Am unable to use the features described in the manualCannot access my voicemail Phone cannot be detected by others via Bluetooth

POP C2 specifications

The Alcatel POP C2 is an entry-level smartphone that emerged as a popular choice for users looking for a budget-friendly device packed with decent features. Launched as part of Alcatel's POP series, the C2 is designed to cater to users who prioritize essential smartphone functionalities without breaking the bank.

One of the key features of the Alcatel POP C2 is its display. The device sports a 4.5-inch touchscreen with a resolution of 480 x 854 pixels. This allows for a satisfactory visual experience, making it suitable for everyday tasks like browsing the web, watching videos, and engaging with social media. The screen size is comfortable for single-handed use, appealing to users who favor compact devices.

Under the hood, the POP C2 is powered by a quad-core processor, which enables smooth multitasking and decent performance for basic applications. With 1 GB of RAM, users can expect the phone to handle typical functions effectively. The device comes with 4 GB of internal storage, which, although modest, can be expanded via a microSD card slot to accommodate more apps, photos, and media files.

The POP C2 runs on the Android operating system, specifically Android 4.2 Jelly Bean. This platform provides access to a wide range of applications through the Google Play Store, allowing users to customize their device according to their preferences. The availability of Google services enhances the overall user experience, adding functionalities that are critical in today’s mobile landscape.

In terms of photography, the Alcatel POP C2 features a 5-megapixel rear camera with an LED flash, which allows for decent photography in good lighting conditions. Although the camera may not compete with higher-end smartphones, it is suitable for capturing everyday moments. Additionally, a VGA front camera is included, making it possible to engage in video calls or take selfies.

The device is equipped with a removable 1,500 mAh battery, which offers reasonable endurance for day-to-day usage, ensuring that users can enjoy their smartphone experience without frequent recharges. Connectivity options on the POP C2 include 3G support, Wi-Fi, Bluetooth, and GPS, providing the necessary tools for staying connected and navigating efficiently.

Overall, the Alcatel POP C2 stands out as a reliable entry-level smartphone that serves the basic needs of users. Its combination of a compact design, functional specifications, and essential features makes it a viable option for first-time smartphone users or those seeking a secondary device for routine tasks.