Lochinvar 000 - 300, 150 Lighting Instructions, To Turn OFF GAS to Appliance, Water Connections

Page 2

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Turn off all electrical power to the appliance.

3.Remove the upper front access panel

4.Turn the power switch on the inside of the cabinet to "OFF" position.

5.Set the thermostat to the lowest setting.

6.This appliance is equipped with an ignition device which automatically lights the burners. DO NOT try to light the burners by hand.

7.Turn the gas control knob on the gas valve clockwise to the "OFF" position.

FIG. 1 Combination Gas Valve

TO TURN OFF GAS TO APPLIANCE

1.Turn off all electric power to the appliance if service is to be performed.

2.Turn the gas control knob on the gas valve clockwise to the "OFF" position. Do not force.

￿WARNING

Should overheating occur or the gas fail to shut off, do not turn off or disconnect the electric supply to the pump. Instead, shut off the gas supply at a location external to the appliance.

HOT SURFACE IGNITION SYSTEM

The hot surface ignition module is not repairable. Any modification or repairs will invalidate the warranty and may create hazardous conditions that result in property damage, personal injury, fire, explosion and/or toxic gases. A faulty ignition module must be replaced with a new unit. The hot surface igniter is also the flame sensor.

Call a qualified service technician if service is required on the hot surface ignition system.

WATER CONNECTIONS

8.Wait five (5) minutes to clear out any gas. If you smell gas, STOP! Follow the instructions in the safety information "What To Do If You Smell Gas". If you don't smell gas, go on to the next step.

9.Turn the gas control knob on the gas valve counterclockwise to the "ON" position.

10.Set the thermostat to the desired setting.

11.Turn the power switch on the inside of the cabinet to the “ON” position.

12.Replace control access panel.

13.Turn on all electrical power to the appliance.

14.If the appliance will not operate, follow the instructions "To Turn Off Gas To Appliance" and call your service technician or gas supplier.

FIG. 2 Water Connections

Inlet and Outlet Connections

For ease of service, install unions on inlet and outlet of the appliance. The connection to the appliance marked "Inlet" on the header should be used for return from the system. The connection on the header marked "Outlet" is to be connected to the supply side of the system.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents User Warning Lighting Instructions For Your Safety Read Before OperatingWhat to do if YOU Smell GAS HOT Surface Ignition System Lighting InstructionsTo Turn OFF GAS to Appliance Water ConnectionsVent System Options Outdoor InstallationRelief Valve Avoid contact with hot discharge waterMaintenance Indicating Light FunctionHeat Exchanger Cleaning This area is hot and direct contact could result in burnsLocating Temperature Control Temperature AdjustmentOperating Temperature Control Temperature Control SettingsOutdoor AIR Reset Option

000 - 300, 150, EB-EWU-02 specifications

Lochinvar has built a strong reputation in the field of advanced heating technology, and the Lochinvar 000 - 300,EB-EWU-02,150 unit epitomizes this legacy. This high-efficiency water heater is designed for commercial applications, delivering reliable hot water supply with exceptional performance while prioritizing energy savings.

One of the main features of the Lochinvar 000 - 300 is its impressive thermal efficiency. With a rating that exceeds industry standards, it ensures maximum heat transfer with minimal energy loss. The unit operates at a high combustion efficiency, allowing it to deliver significant cost savings over its lifespan. This efficiency is attributed to its innovative heat exchanger design, which optimizes the transfer of heat, ensuring rapid recovery rates.

Technologically, the Lochinvar 000 - 300 incorporates advanced control systems that enhance its operational capabilities. It features a user-friendly interface that allows for precise temperature adjustments and monitoring, ensuring that hot water is available whenever it is needed. Additionally, this unit is equipped with advanced safety systems, including flame monitoring and a comprehensive diagnostic suite that provides real-time performance data, enhancing reliability and reducing maintenance needs.

The Lochinvar 000 - 300 is crafted from high-quality materials that ensure durability and resilience, even in demanding environments. Its robust construction not only allows it to withstand the rigors of commercial use but also extends its operational life, making it a cost-effective solution in the long run.

In terms of installation, the Lochinvar 000 - 300 is designed for flexibility. It can be easily integrated into existing systems, accommodating various configurations while minimizing the need for extensive modifications. Its compact design allows for installation in tight spaces without compromising performance.

Additional characteristics include a powerful pump for efficient circulation and a range of compatibility with different fuels, including natural gas and propane, making it a versatile choice for many applications.

In conclusion, the Lochinvar 000 - 300,EB-EWU-02,150 stands out with its exceptional efficiency, advanced technology, and reliable performance, making it an ideal choice for commercial water heating needs. Its focus on energy savings and user convenience positions it as a leader in the industry, ensuring that businesses can deliver hot water effectively while controlling operation costs.
Top Page Image Contents