Language, System, MAC Filtering, Reboot, Reset

Router IP Address: The router's IP address on the LAN. The default setting is “192.168.1.1”.

Subnet Mask: The router's internal LAN subnet mask. The default setting is “255.255.255.0”.

Host name: the name of the server.

DHCP Server: DHCP Server will automatically assign IP addresses to devices on the network. The default setting is “Enable”.

DHCP IP Pool: Set a range of IP addresses available to access.

DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its assigned IP address before it is required to renew the lease.

MAC Filtering

MAC filtering is used to control specific MAC addresses to access.

Select “Disable" : All terminal devices are allowed to access the network.

Select “Enable": Only devices in this list are allowed to access the network. You can add, edit or delete the configuration.

Note: The maximum allowed MAC list is 10.

5.5 Language

Change language:

1,Choose the language, ; 2, Click <Apply>.

The default language is English.

5.6 System

Reboot

Click <Reboot> to restart the device. you can also use the hardware reboot key under the SIM Cover with remark R.

Reset

Reset the device to the original factory settings. you can also use the hardware reset button(Press Power key and WPS key together to reset your device).

Save the configuration 1,Click <Backup>;

2,Select the location to save current settings.

Restore the configuration 1,Click <Restore>;

2,Select a file saved previously to restore the settings.