Alcatel Y600 manual Quick Setup, Login the configuration, Icon description

1. Web UI configuration

1.1 login the configuration page

Open the browser, and then input the address http://192.168.1.1. The default login password is admin.

1.2 Icon description

The icon description as bellow:

Category	Icon Display
Signal Strength			From no signal to excellent
Connection	Disconnect		Connected
Status
SMS	disable,	enable,	SMS is full,	Unread

Battery	From lowest power to full power
Wi-Fi status	Wi-Fi is active

Tab 2.1

2. Quick Setup

Admin Password:

Login Password: Set the password for login.

Wi-Fi Settings:

SSID: Set the network name of this device.

Security: Configure the security mode for Wi-Fi connection. Select an encryption mode in the list and set your password.

If you select "None", any Wi-Fi enabled device can connect to the device without the password.

WEP: Lower security. Works with older Wi-Fi devices.

Recommended only if your devices don't support WPA or WPA2. WPA: A strong security standard, supported by most Wi-Fi devices.

8 to 63 ASCII characters needed.

WPA2: A stronger, newer security standard. Limited to newer Wi-Fi devices.

4