Alcatel Sparq (T-Mobile) manual Receiving a call, During a call, Conference calls

3.2Receiving a call

When you receive an incoming call, press the key to talk and then hang up using the key.

If the icon is displayed, the vibrator is activated and there is no ringtone. If the icon is displayed, the cellphone neither rings nor vibrates.

The caller’s number is displayed if it is transmitted by the network (contact your network operator to check service availability).

Muting the ringtone

To mute ringtone of current incoming call, press key. Answer the call by pressing the key.

Rejecting a call

Press the key once, or reject it by SMS (Options\Reject call with SMS).

3.3During a call

During a call, following options are available:

-New call (Hold the current call and dial another number)

-Hold (Hold the current call)

-Mute (Mute the current call)

-DTMF (Enable/Disable sending DTMF during the call)

-Volume (Adjust the vloume level)

PROMPT: You may also adjust sound level by using key directly during a call.

-Switch audio patch (Switch the audio path between the Bluetooth headset and cellphone)

-Directory (Enter the directory)

-Messages (Enter Message Center)

-Calendar (Enter Calendar)

-Sound recorder (record your current call).

You can switch the audio speech from handset to Bluetooth device when connected. You may also use Handsfree function with during a call.

WARNING: move the handset away from your ear while using the “handsfree” option because the amplified volume might cause hearing damage.

Handling two calls

•Answering a second call (ensure that “Call waiting” is activated, see page 37).

•To call a second party during a call, dial the number directly.

3.4Conference calls

Your cellphone allows you to talk to several people at the same time (up to five). If you are on a double call, press “Options” and select “Conference”. If a third call comes in, answer it by

pressing the key and speak with your new caller.

This caller becomes a member of the conference if you press “Options” and select “Add to

conference”. Pressing disconnects the current call.

To end the conference call, press “Options” and select “End conf.”.