ASRock P67 Pro manual Installation of Memory Modules Dimm, Dual Channel Memory Configurations

Page 18

2.5 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel con- guration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR3 DIMM pair in Dual Channel A (DDR3_ A1 and DDR3_B1; Blue slots; see p.11 No.4) or identical DDR3 DIMM pair in Dual Channel B (DDR3_A2 and DDR3_B2; White slots; see p.11 No.5), so that Dual Channel Memory Technology can be activated. This motherboard also allows you to install four DDR3 DIMMs for dual channel con guration, and please install identical DDR3 DIMMs in all four slots. You may refer to the Dual Channel Memory Con guration Table below.

Dual Channel Memory Configurations

 

DDR3_A1

DDR3_A2

DDR3_B1

DDR3_B2

 

(Blue Slot)

(White Slot)

(Blue Slot)

(White Slot)

 

 

 

 

 

(1)

Populated

-

Populated

-

(2)

-

Populated

-

Populated

 

 

 

 

 

(3)*

Populated

Populated

Populated

Populated

 

 

 

 

 

*For the con guration (3), please install identical DDR3 DIMMs in all four slots.

1.If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color. In other words, install them either in the set of blue slots (DDR3_A1 and DDR3_B1), or in the set of white slots (DDR3_ A2 and DDR3_B2).

2.If only one memory module or three memory modules are installed in the DDR3 DIMM slots on this motherboard, it is unable to activate the Dual Channel Memory Technology.

3.If a pair of memory modules is NOT installed in the same Dual Channel, for example, installing a pair of memory modules in DDR3_A1 and DDR3_A2, it is unable to activate the Dual Channel Memory Technology .

4.It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be dam- aged.

5.Some DDR3 1GB double-sided DIMMs with 16 chips may not work on this motherboard. It is not recommended to install them on this motherboard.

18

Image 18
Contents P67 Pro Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Unique Feature ConnectorBios Feature Support CDHardware MonitorCertifications Page Page Motherboard Layout 20.3cm 8.0I/O Panel LAN Port LED IndicationsTable for Audio Output Connection Page Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Dual Channel Memory ConfigurationsInstalling a Dimm Notch break BreakInstalling an expansion card Expansion Slots PCI and PCI Express SlotsPcie slots Jumpers Setup DescriptionOnboard Headers and Connectors USB 2.0 Headers System Panel Header Chassis and Power Fan Connectors ATX Power ConnectorATX 12V Power Connector Please connect an ATX 12V power supply to this connectorSerial ATA3 SATA3 Hard Disks Installation Hot Plug and Hot Swap Functions for Sata / Sataii HDDs What is Hot Plug Function?What is Hot Swap Function? Hot Plug and Hot Swap Functions for SATA3 HDDsPoints of attention, before you process the Hot Plug How to Hot Plug a Sata / Sataii / SATA3 HDD Set up Bios Driver Installation GuideInstalling Windows XP / XP 64-bit With RAID Functions Make a Sata / Sataii / SATA3 Driver DisketteSetting Up a RAID Ready System \ Intel Rapid Storage InformationMigrating a RAID Ready System to RAID 0, RAID 1 or RAID Use RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Page Introduction Uefi Menu BarNavigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen Advanced Screen ASRock Instant FlashCPU Configuration Adjacent Cache Line Prefetch Active Processor CoresHardware Prefetcher Enhance Halt State C1EIntegrated Clock Chip Configuration Dram Configuration Read to Precharge tRTP RAS to RAS Delay tRRDWrite to Read Delay tWTR Four Activate Window tFAWLow Mmio Align North Bridge ConfigurationSouth Bridge Configuration VT-dVoltage Droop Adjust South Bridge Configuration Restore on AC/Power LossPCI Legacy Mode Deep SxSata Controller Storage ConfigurationSata Mode Hard Disk S.M.A.R.TSerial Port Super IO ConfigurationOnBoard Floppy Controller Serial Port AddressVoltage Configuration Acpi Configuration USB Configuration USB 2.0 ControllerLegacy USB Support Chassis Fan 2 Setting CPU Fan 1 & 2 SettingChassis Fan 1 Setting Chassis Fan 3 SettingBoot Screen Security Screen Exit Screen Software Support Installing OS on a HDD Larger Than 2TB
Related manuals
Manual 245 pages 53.28 Kb