ASRock Fatal1ty 990FX Professional manual Acpi Configuration

Page 67

3.4.6 ACPI Configuration

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it.

Check Ready Bit

Use this item to enable or disable the feature Check Ready Bit.

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power re- covers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the power-soft-off mode.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

USB Keyboard/Remote Power On

Use this item to enable or disable the system to wake from S5 using USB Keyboard/Remote.

67

Image 67
Contents Fatal1ty 990FX Professional Series Fatal1ty Story LIVIN’ Large Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications Rear Panel I/O ConnectorSmart Switch Bios FeatureMonitor Unique FeatureSupport CD HardwarePage Page Page 24.4cm 9.6-in Motherboard LayoutTable for Audio Output Connection LAN Port LED IndicationsPage Pre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmBreak Notch Installing a DimmExpansion Slots PCI and PCI Express Slots Installing an expansion cardPcie Slots Requirements Slitm and Quad Slitm Operation GuideFor Windows XP / XP 64-bit OS For Slitm mode only Driver Installation and SetupSelect Control Panel tab Select Nvidia Control Panel tabPage CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards CrossFireTM Bridge For Windows 7 / VistaTM OS For Windows XP OS\ Surround Display Information Surround Display FeatureJumper Setting Jumpers SetupOnboard Headers and Connectors USB 3.0 Header Besides two default USB System Panel Header Chassis Speaker Header ATX 12V Power Connector ATX Power ConnectorFront USB 3.0 Panel Installation Guide Smart Switches Rear USB 3.0 Bracket Installation GuideStatus Code Description 11 Dr. DebugPage Page Page Hot Plug and Hot Swap Functions for SATA3 HDDs Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? What is Hot Swap Function?Points of attention, before you process the Hot Plug SATA3 HDD Hot Plug Feature and Operation GuideHow to Hot Plug a SATA3 HDD Installing Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Uefi Use RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Teaming Function Operation Guide Click Expert ModePage Page From Control Panel, double-clickNetwork Connections Uefi Menu Bar IntroductionSystem Time HourMinuteSecond Navigation KeysMain Screen To jump to the Exit Screen or exit the current screenOC Tweaker Screen Processor Maximum Voltage Dram Timing Control Power Down EnableProcessor Maximum Frequency North Bridge Maximum FrequencyRAS to RAS Delay tRRD RAS# to CAS# Delay tRCDCommand Rate CR Write Recovery Time tWRNB Voltage Would you like to save current setting user defaults?Voltage Control CPU Load-line calibration Dram VoltageInstant Flash Advanced ScreenEnhance Halt State C1E CPU ConfigurationCool ‘n’ Quiet Secure Virtual MachinePrimary Graphics Adapter North Bridge ConfigurationSouth Bridge Configuration Storage Configuration Hard Disk S.M.A.R.T Infrared Port Super IO ConfigurationSerial Port Serial Port AddressAcpi Configuration Acpi Hpet table USB Mouse Power OnLegacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 ControllerChassis Fan 3 Setting CPU Fan 1 & 2 SettingChassis Fan 1 Setting Chassis Fan 2 SettingBoot Screen Security Screen Exit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CDInstalling OS on a HDD Larger Than 2TB