2.14 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be
or.
2.15 Installing Windows® 7 / 7
If you want to install Windows® 7 / 7
2.15.1 Installing Windows® XP / XP 64-bit Without RAID Functions
If you want to install Windows® XP / XP
Using SATA / SATAII / SATA3 HDDs with NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
SATA Configuration. B. Set the option “SATA Mode Selection” to [AHCI] for SATA2 ports.
Set the option “ASMedia SATA3 Mode” to [AHCI] for SATA3 ports.
STEP 2: Make a SATA / SATAII / SATA3 driver diskette. (Please use USB floppy or floppy disk.)
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system
C. When you see the message on the screen, “Do you want to generate Serial ATA driver diskette [YN]?”, press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive. WARNING! Formatting the floppy diskette will lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>. E. The system will start to format the floppy diskette and copy SATA / SATAII /
SATA3 drivers into the floppy diskette.
29