ASRock X79 Extreme4-M manual ATX Power Connector, Supply to this connector

Page 35

Chassis, Power and SB Fan Connectors

Please connect the fan cables

(4-pin CHA_FAN1)

to the fan connectors and

(see p.12

No. 10)

match the black wire to the

 

 

ground pin. CHA_FAN1,

 

 

CHA_FAN2 and CHA_FAN3

(3-pin CHA_FAN2)

support Fan Control. SB_FAN1

(see p.12

No. 8)

Supports Quiet Fan.

(3-pin CHA_FAN3)

 

(see p.12

No. 29)

 

(3-pin PWR_FAN1)

 

(see p.12

No. 7)

 

(3-pin SB_FAN1)

 

(see p.12

No. 17)

 

 

 

CPU Fan Connectors

Please connect the CPU fan

(4-pin CPU_FAN1)

cable to the connector and

(see p.12

No. 6)

match the black wire to the

 

 

ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

(3-pin CPU_FAN2)

(see p.12 No. 4)

ATX Power Connector

12

24

Please connect an ATX power

(24-pin ATXPWR1)

 

 

supply to this connector.

(see p.12 No. 9)

 

 

 

 

1

13

 

35

Image 35
Contents X79 Extreme4-M Disclaimer Copyright NoticeContents Introduction Uefi Menu Bar Uefi Setup UtilityIntroduction Package ContentsSpecifications USB3.0 ConnectorSmart Switch Bios FeatureMonitor Unique FeatureSupport CD HardwarePage Page Page Motherboard Layout Link I/O PanelLAN Port LED Indications Off No Link BlinkingPage Screw Holes Pre-installation PrecautionsCPU Installation Locate Pin1 and the two orientation key notches With fan operation or contact other components Installation of CPU Fan and HeatsinkInstalling a Dimm Installation of Memory Modules DimmExpansion Slots PCI and PCI Express Slots Installing an expansion cardRequirements Slitm and Quad Slitm Operation GuideASRock SLIBridge Card Double-click Nvidia Settings icon on your Windows taskbar Driver Installation and SetupFor Windows XP / XP 64-bit OS For Slitm mode only Select Control Panel tab Select Nvidia Control Panel tabCrossFireXTM and Quad CrossFireXTM Operation Guide Installing Two CrossFireXTM-Ready Graphics CardsCrossFire Bridge For Windows 7 / VistaTM OS Install the required drivers to your systemFor Windows XP OS \ Surround Display Information Surround Display FeatureCIR sensors in different angles ASRock Smart Remote Installation GuideASRock XFast Charger Operation Guide Clear Cmos Jumper Jumpers SetupDescription Serial ATA Sata Data Cable Onboard Headers and ConnectorsSerial Ataii Connectors Serial ATA3 ConnectorsOne USB 3.0 header on this USB 3.0 Header Besides two default USBOptional wireless transmitting Ports on the I/O panel, there isPower off Power LED Header Please connect the chassisPower LED to this header to Indicate system power statusSupply to this connector ATX Power ConnectorATX 12V Power Connector Smart Switches Status Code Description 15 Dr. DebugPage Page Page Serial ATA3 SATA3 Hard Disks Installation Hot Plug and Hot Swap Functions for SATA3 HDDs What is Hot Plug Function?What is Hot Swap Function? Hot Plug and Hot Swap Functions for Sata / Sataii HDDsPoints of attention, before you process the Hot Plug Points of attention, before you process the Hot Unplug Points of attention, before you process the Hot PlugUse RAID Installation Guide to set RAID configuration Driver Installation GuideSet up Uefi Install Windows XP / XP 64-bit OS on your system Installing Windows XP / XP 64-bit Without RAID FunctionsUntied Overclocking Technology Uefi Menu Bar IntroductionF10 Navigation KeysMain Screen Navigation KeysOC Tweaker Screen Additional Turbo Voltage Turbo Boost Power LimitDram Timing Control Load XMP Setting Core Current LimitDram tRAS Command Rate CRDram Power Down Mode Dram tRPMemory Fast Boot Phase SheddingMemory Power Savings Mode Memory Test When Fast BootCPU Load-Line Calibration Load Power Saving ModeUser Default Voltage Control CPU Core VoltageInstant Flash Advanced ScreenSystem Browser CPU Configuration CPU C6 State Support CPU Thermal ThrottlingEnhance Halt State C1E CPU C3 State SupportNorth Bridge Configuration South Bridge Configuration Storage Configuration Serial Port Address Super IO ConfigurationUse this item to enable or disable the onboard serial port Serial PortAcpi Configuration Legacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 ControllerME Subsystem Intel ME Subsystem Configuration ME VersionHardware Health Event Monitoring Screen Boot Screen Security Screen Exit Screen Software Support Installing OS on a HDD Larger Than 2TB in Ahci Mode Copy Intel RAID drivers into a USB flash disk Installing OS on a HDD Larger Than 2TB in RAID ModeWindows VistaTM 64-bit Page Windows 7 64-bit