MSI Z68A-GD55 (B3) Degraded RAID Array（还原 RAID 阵列）, 退出 Intel RAID Option ROM 并重新启动 Windows 系统。

Intel RAID

Degraded RAID Array（还原 RAID 阵列）

如果RAID1，RAID5，或RAID10中某一个驱动失败或不能连接，数据镜像丢失等，都 会导致这些卷标被降级。所以，系统仅利用现有可用硬驱动盘。重新创建数据镜像和冗 余数据恢复，请参考下面相应操作流程。

硬盘驱动丢失

1� 确认系统已关机。

� 重新连接硬盘驱动器。

3� 重新启动系统到 Windows 下; 重建将自动产生。

硬盘驱动失效

1� 确认系统已关机。

� 用一个同等或更大容量的新硬盘代替失效硬盘驱动。

3� 在开机自检期间同时按�下 <Ctrl> 和 <I> 键重新启动到 Intel RAID Option ROM。 4� 选择重建的目标磁盘端口并且按�下” ENTER “ 。

RAID Volumes
ID	Name	Level	Strip	Size	Status		Bootable
0	Volume0	RAID 1(Mirror) N/A		XXX.XGB Degraded			Yes
Physical Disks:
Port	Device Model		Serial #		Size	Type/Status(Vol ID)
1	XXXXXXXXXXXXX		XXXXXXXXXXXXX		XXX.XGB	Member Disk (0)
2	XXXXXXXXXXXXX		XXXXXXXXXXXXX		XXX.XGB	Member Disk (0)
Press	<CTRL-I>	to enter Configuration Utility..

5� 退出 Intel RAID Option ROM 并重新启动 Windows 系统。

				[ MAIN MENU ]
	1.	Create RAID Volume			4.	Recovery Volume Options
	2.			[ DEGRADED VOLUME DETECTED			]
		Delete RAID Volume			4.	Recovery Volume Options
		“Degraded” volume and disk available for rebuilding detected. Selecting
				5.	Exit	operating system.
		a disk initiates a rebuild. Rebuild completes in the
				[ DISK / VOLUME INFORMATION			]
RAID Volumes :
None	defined.Select the port of the destination disk for rebuilding (ESC to exit):
		Port	Drive	Model	Serial #			Size
Physical		1	XXXX-XXXXXXXX		XXXXXXXXXXXXXX			XXX.XGB
		Devices :
Port	Device Model			Serial #			Size	Type/Status (Vol ID)
1	XXXX-XXXXXXXX			XXXXXXXXXXXXXX		XXX.XGB		Non-RAID Disk
2			[ ↑↓] - Previous/ Next		[ENTER] - Select		[ESC] - Exit
	XXXX-XXXXXXXX			XXXXXXXXXXXXXX		XXX.XGB		Non-RAID Disk

[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu

92