MSI Complete Guide to CPU Installation for B75A-G43 Motherboard

Page 21

MS-7758

CPU & Cooler Installation

When installing a CPU, always remember to install a CPU cooler. A CPU cooler is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and CPU cooler installation. Wrong installation can damage both the CPU and the mainboard.

1. Unhook and lift the loading lever to

2. The

loading

plate

should

the fully open position.

automatically lift up as the loading

 

lever is pushed to the fully open

 

position. Do not touch any of the

 

CPU socket pins.

 

 

Chapter 1

3.Line up the CPU to fit the CPU socket. Be sure to hold the CPU by the base with the metal contacts facing downward. The alignment keys on the CPU will line up with the edges of the CPU socket to ensure a correct fit.

4.Close the loading plate and remove the plastic protective cap.

Alignment Key

1-11

Image 21
Contents MS-7758 v2.x Mainboard B75A-G43 seriesRevision History Preface FCC-B Radio Frequency Interference Statement Bsmi EMI 聲明 Weee Waste Electrical and Electronic Equipment Statement Español Türkçe Contents Appendix a Realtek Audio Getting Started Optional Accessories Packing ContentsChapter Assembly PrecautionsProcessor Support Mainboard SpecificationsForm Factor Connectors Quick Guide Connectors Reference Guide LAN Back Panel Quick GuideHDMI+DVI DVI+VGA VGA+HDMI Introduction to the LGA 1155 CPU CPU Central Processing UnitCPU & Cooler Installation Page Mainboard Hook Mounting Screw Holes Power Supply JPWR1 ATX 24-pin Power ConnectorJPWR2 ATX 8-pin Power Connector Memory Dual -Channel mode Population RuleInstalling Memory Modules Expansion Slots PCIe Peripheral Component Interconnect Express SlotPCI Peripheral Component Interconnect Slot Single Video Card Installation Video/ Graphics CardsPCI Interrupt Request Routing AMD CrossFire Multi -GPU Technology Chapter SATA1~6 Sata Connector Internal ConnectorsCPUFAN,SYSFAN1~4 Fan Power Connectors JFP1, JFP2 Front Panel Connectors USB 3.0 Bracket optional JUSB3 USB 3.0 Expansion ConnectorJCI1 Chassis Intrusion Connector JUSB1~2 USB 2.0 Expansion ConnectorsJTPM1 TPM Module Connector JAUD1 Front Panel Audio ConnectorJLPT1 Parallel Port Connector JCOM1 Serial Port ConnectorJDLED3 Voice Genie Connector optional JBAT1 Clear Cmos Jumper JumperBios Setup Press DEL key to enter Setup Menu, F11 to enter Boot Menu EnteringOverview Boot device priority bar Operation Sub-MenuGeneral Help System Status SettingsPcie GEN3 AdvancedHpet Page Save & Exit BootEist Chapter Page MEMORY-Z Page ECO Browser Installing WinkiUtilities Page Updating the Bios with Live Update Security Realtek Audio Installation for Windows Installing the Realtek HD Audio DriverSoftware panel overview Software ConfigurationAuto popup dialog Ix a Append Hardware Default SettingBackpanel audio jacks to 8-channel speakers diagram