MSI B75MA-G43 manual Installing Windows XP with Ahci Mode, Creating a Intel Ahci Driver Disc

MS-7798

Installing Windows XP with AHCI Mode

If you prefer to install Windows XP as the operating system with AHCI mode, please prepare AHCI drivers for Windows XP in advanced.

Creating a Intel AHCI Driver Disc

Please follow the instruction below to make an “Intel® AHCI Driver” for yourself.

■Insert the MSI DVD into the DVD-ROM drive.

■Click the “Browse CD” on the Setup screen.

■Copy all the contents from \\Storage\Intel\PCH 7\f6flpy-x86 or f6flpy-x64 to a formatted floppy diskette.

■The driver diskette is done.

Important

You can download the driver from http://download3.msi.com/files/downloads/dvr_exe/intel7x_rst_floppy_mb.zip

Installing the Windows XP Operating System:

Please follow the below steps:

1.Access BIOS, set SATA Mode to AHCI mode, save, exit and reboot.

2.Ensure the USB Floppy Disk Drive is connected to the computer.

3.Install Windows XP. When Windows Setup screen appears a message “Press F6 if you need to install a third party SCSI or RAID driver....”, press “F6” key.

4.Insert the floppy disk containing the AHCI drivers into the floppy disk drive.

5.When the next screen appears, press the “S” key to specify an additional device.

6.From the provided list, select the Intel(R) 7 Series SATA AHCI Controller.

7.Follow the on-screen instructions to complete the installation.

ix C Append

C-3