Lennox International Inc l7742u owner manual Schedule Screen, Days & Events Programming process

Schedule Screen

Days & Events Programming process

	Action	Display shows...
1	Press SCHEDULE tab	SCHEDULE screen
2	Press EDIT	UP/DOWN arrows on right−hand
		side of screen; EDIT changes to
		CANCEL
3	Press NEXT to highlight the de-	Days change to match selected
	sired grouping of days	group, e.g. MON TUE WED THU FRI
4	Press an event: WAKE (default),	Filled triangle above event
	LEAVE, RETURN, & SLEEP to	indicates which event is selected
	select for programming	for change
5	Press UP/DOWN arrows to	After change is made, SAVE
	select desired temperature	appears in the bottom right−hand
		of the screen
6	Press FAN repeatedly to select	Fan indicator displays selection
	desired fan mode	(ON, AUTO, or CIRC)
7	Press UP/DOWN arrows to	Information area displays start
	adjust start time for	time
	selected event

8Repeat steps 4 − 7 for all remaining events.

(If you selected other than MON TUE WED THU FRI SAT SUN), continue; otherwise, skip to step 11.

9 Press NEXT for the next group	Days change to match selected
or the next day	group, e.g. SAT SUN

10 Repeat steps 3 through 8 for the remaining days, if necessary.

11 Press SAVE when all events and	The changes are made and the
days are programmed as desired	schedule screen reappears.

		1
					5
	6
	WAKE	PERIOD	BEGINS		7
	5:OOAM
2	4		3	9	11

Figure 5. Programming days and events

506229−01 05/09 Page 8