MSI Z87-XPOWER manual Enabled Enables the PS2 devices during Post

Page 82

Chapter 3

Important

If you want to enter BIOS with enabled “MSI Fast Boot” mode, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press the "GO2BIOS" button (optional) on the motherboard. And then the system will enter to BIOS setup directly at next boot.

▶Fast Boot [Enabled for Windows 8, Disabled for other OS]

Windows 8 fast boot allows user to enable or disable the USB, PS2 and SATA devices to accelerate system boot. This item will only be available when "MSI Fast Boot" is disabled.

[Enabled]

Enables the Fast Boot configuration.

[Disabled]

Disables the Fast Boot configuration.

▶USB Support [Full Initial]

Disabling the USB devices temporarily during POST will accelerate the system boot. The USB devices will be available after entering the operating system. This item will appear when “Fast Boot” is enabled.

[Disabled]

Disables the USB devices during POST for faster boot time.

[Full Initial]

Enables the USB devices during POST.

▶PS2 Devices Support [Enabled]

Disabling the PS2 devices temporarily during POST will accelerate the system boot. The PS2 devices will be available after entering the operating system. This item will appear when “Fast Boot” is enabled.

[Disabled]

Disables the PS2 devices during POST for faster boot time.

[Enabled]

Enables the PS2 devices during POST.

Important

If you disable the PS/2 or USB devices and you want to enter BIOS with PS/2 or USB keyborard, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press the "GO2BIOS" button (optional) on the motherboard. And then the system will enter to BIOS setup directly at next boot.

▶ SATA Device Support [Enabled]

Disabling the SATA devices temporarily during POST will accelerate the system boot. The SATA devices will be available after entering the operating system. This item will appear when “Fast Boot” is enabled.

[Disabled]

Disables the SATA devices during POST for faster boot time.

[Enabled]

Enables the SATA devices during POST.

▶Internal GOP Configuration

Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter the sub-menu. This menu shows the iGFX Driver version for system information management. This sub-menu will appear when “Windows 8 Feature” is enabled.

▶Secure Boot

Sets the Windows secure boot to prevent the unauthorized accessing. Press <Enter> to enter the sub-menu. This sub-menu will appear when “Windows 8 Feature” is enabled.

BIOS Setup

3-12

Image 82
Contents Preface G52-78111X1Preface Smartphone Application Technical Support IiiSafety Instructions CE Conformity クラス B 情報技術装置 無線設備警告聲明工作頻率2.412GHz~2.462GHz該頻段限於室內使用。 この製品は、周波数帯域 2.412GHz~2.484GHz で動作しているときは、屋内において のみ使用可能です。European Union ViiWeee Waste Electrical and Electronic Equipment Statement Hinweis von MSI zur Erhaltung und Schutz unserer UmweltEspañol Türkçe Contents OC Switch Mode LEDs Debug Code LED Table FV1 V-Check Connectors Check SpotsBios LEDs Total InstallerBios Setup XiiiPage Chapter Motherboard Packing ContentsOptional Accessories ShieldAssembly Precautions 1066 MHz Motherboard Specifications4th Generation Intel Core i7 / Core i5 / Core i3 / Pentium 1920x1080@60Hz, 36bpp1x GO2BIOS button WirelessSupports Intel Wireless Display WiDi 1x Power buttonBluetooth FeaturesWi-Fi Command CenterFor the latest information about CPU, please visit Connectors Quick Guide Connectors Reference Guide Back Panel Quick Guide HDMI+HDMI CPU Central Processing Unit Golden triangle is the Pin 1 indicatorIntroduction to the LGA 1150 CPU CPU & Heatsink Installation Video DemonstrationChapter Chapter Dual -Channel mode Population Rule MemoryMounting Screw Holes LinePower Supply JPWR1~4 ATX Power ConnectorsPCIE1~7 PCIe Expansion Slots Expansion SlotsPCIe x16 Slots Bandwidth Table Single Video Card Installation Video/ Graphics CardsAMD CrossFire Multi -GPU Technology Chapter Nvidia SLI Technology Choose this item Internal Connectors SATA1~10 Sata ConnectorsCPUFAN1~2,SYSFAN1~3, OPTFAN1~2 Fan Power Connectors JFP1, JFP2 System Panel Connectors JUSB1~2 USB 2.0 Expansion Connector JUSB3~4 USB 3.0 Expansion Connector JCI1 Chassis Intrusion ConnectorMSATA1 mSATA Slot JAUD1 Front Panel Audio ConnectorMSATA slot is for mSATA interface solid state drives SSD FV1 V-Check Connectors Voltage CheckpointsCheck Spots OC1 OC Genie Button Buttons & SwitchesOnOff RESET1 Reset Button POWER1 Power ButtonDISCH1 Discharge Button FASTB1 GO2BIOS Button RATIO+, RATIO- CPU Ratio Control ButtonsIncrease BCLK+, BCLK- Base Clock Control ButtonsBCLKSTEP1 Base Clock step swtich Base clockMULTIBIOSSWITCH1 Multi -BIOS Switch OCSWITCH1 OC Genie Mode Switch Cease FIRE1 PCIe CeaseFire SwitchJBAT1 Clear Cmos Jumper JumperClear Data OC Switch Mode LEDs LED Status IndicatorsBios LEDs Bios LEDs Digit Debug Code LEDReady To Boot event/Legacy Boot event A8,A9,AB Start of Setup. Bios setup if needed/ requestedDebug Code LED Table Total Installer Drivers and UtilitiesQuick Installation CPU Installation Quick InstallationQuick Installation Memory Installation Motherboard Installation Chapter Power Connectors Installation Chapter Sata HDD Installation MSATA SSD Installation JFP1 Connecotr Installation Front Panel Connector InstallationFront Panel Audio Connector Installation USB2.0 Connector Installation Peripheral Connector InstallationUSB3.0 Connector Installation Graphics Card Installation Chapter Bios Setup Press DEL key to enter Setup Menu, F11 to enter Boot Menu Entering SetupEntering Bios Setup Bios SetupOverview Bar Operation Settings System StatusDisabled AdvancedInstalled in the system ModeIntegrated Graphics Display Entry on S3 RTC Wake EnabledTechnology Enables or disables the legacy USB support Bios Save/RestoreSSD speed Regulation Before AC power lossRequirement Enabled Enables the PS2 devices during Post Disabled Disables this function Boot settingsWhen activity or input signal of LAN device is detected CustomBoot SecuritySave & Exit Chapter Strap be set to higher value Enables LC PLL for normal usageEnables SB PLL for extreme overclocking LoadingEnhanced Turbo Auto Booting to accelerate the system booting time Dram Timing Mode Auto Selects the memory timing modeDetect of installed memory modules Disabled Disables the PWM power phase switching featureOver the specified temperature Serial Voltage Identification+ Allows you to set the positive offset voltage PerformanceOver-current protection To load the default settings for new devices Electromagnetic Interference problemWorms Disabled Enables the requested cache line onlyProcessor with extended Cpuid value Can function as multiple systems virtuallyAdaptive temperature CPU AES Instructions EnabledEnabled Enables Intel AES support Disabled Power-saving in halt stateChapter Flash OC Profile Hardware Monitor SpeedChapter Page Appendix a Software panel overview Software ConfigurationRealtek Audio Auto popup dialog Hardware Default Setting Backpanel audio jacks to 4-channel speakers diagramBackpanel audio jacks to 6-channel speakers diagram Backpanel audio jacks to 8-channel speakers diagramPage Appendix B Introduction Intel RAIDUsing Intel Rapid Storage Technology Option ROM XXX.X GB Appendix B XXXX-XXXXXXXX Press Y key to accept the volume deletion Delete Volume VerificationXXXX-XXXXXXXX Recovery Volume Options Degraded RAID Array Main MenuAppendix B System Acceleration optional Appendix B RST Synchronization optional When prompted, press Y to confirmPress S to synchronize data