MSI Z87-XPOWER manual Boot, Security

Chapter 3

▶Resume From S3 by USB Device [Disabled]

Disables or enables the system wake up by USB devices.

[Enabled]	Enables the system to be awakened from S3 (Suspend to RAM)
	sleep state when activity of USB device is detected.
[Disabled]	Disables this function.

▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled] Disables or enables the system wake up by PS/2 mouse.

[Enabled]	Enables the system to be awakened from S3/ S4/ S5 state when
	activity of PS/2 mouse is detected.
[Disabled]	Disables this function.

▶Resume From S3/S4/S5 by PS/2 Keyboard [Disabled] Disables or enables the system wake up by PS/2 keyboard.

[Any Key]	Enables the system to be awakened from S3/ S4/ S5 state when
	activity of any key on PS/2 keyboard is detected.
[Hot Key]	Enables the system to be awakened from S3/ S4/ S5 state when
	activity of hot key on PS/2 keyboard is detected.
[Disabled]	Disables this function.

Boot

Sets the sequence of system boot devices.

▶Full Screen Logo Display [Enabled]

Enables or disables to show the full screen logo while system POST.

[Enabled]	The OS boots straight to the GUI without showing the POST screen.
[Disabled]	Shows the POST messages at booting.

▶Boot Mode Select [LEGACY+UEFI]

Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement.

[UEFI]	Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI]	Enables both Legacy BIOS boot mode and UEFI BIOS boot
	mode.

▶FIXED BOOT ORDER Priorities Sets device priority for system boot.

▶Boot Option #1~N

These items are used to prioritize the installed boot devices.

Security

▶Administrator Password

Sets administrator password for system security. Enters the administrator password if set; user has full rights to change the BIOS items.

▶User Password

Sets User Password for system security. Enters the user password if set; but user might have limited rights to change the BIOS items.

BIOS Setup 3-14