| |
| of your drive must match with the drive table. The |
| hard disk will not work properly if you enter im- |
| proper information for this category. If your hard |
| disk drive type is not matched or listed, you can |
| use [Manual] to define your own drive type |
Access M ode | manually. |
The settings are [CHS], [LBA], [Large], [Auto]. | |
Capacity | The formatted size of the storage device. |
Cylinder | Number of cylinders. |
Head | Number of heads. |
Precomp | Write precompensation. |
Landing Zone | Cylinder location of the landing zone. |
Sector | Number of sectors. |
Video
Select the type of primary video subsystem in your computer. The BIOS usually detects the correct video type automatically. The BIOS supports a secondary video subsystem, but you do not select it in Setup.
[EGA/VGA] | Enhanced Graphics Adapter/Video Graphics Array. For EGA, |
| VGA, SEGA, SVGA or PGA monitor adapters. |
[CGA 40] | Color Graphics Adapter, power up in 40 column mode. |
[CGA 80] | Color Graphics Adapter, power up in 80 column mode. |
[MONO] | Monochrome adapter, includes high resolution monochrome |
| adapters |
Base/Extended/Total Memory
The three items show the memory status of the system.