MSI ms-6382 manual Front Panel Connectors JFP1 & JFP2

Hardware Setup

Front Panel Connectors: JFP1 & JFP2

The mainboard provides two front panel connectors for electrical con- nection to the front panel switches and LEDs. JFP1 and JFP2 are compliant with Intel® Front Panel I/O Connectivity Design Guide.

2	8
1	7
	JFP2
2	10
1	9
	JFP1

JFP2 Pin Definition

Pin	Signal	Pin	Signal
1	GND	5	PLED
2	SPK-	6	BUZ-
3	SLED	7	NC
4	BUZ+	8	SPK+

JFP1 Switch/LED Front Panel Electrical Connection

PIN	SIGNAL	DESCRIPTION
1	HD_LED_P	Hard disk LED pull-up to +5V
2	FP PWR/SLP	MSG LED pull-up (330ohm) to +5V
3	HD_LED_N	Hard disk active LED
4	FP PWR/SLP	MSG LED pull-up (330ohm) to +5V
5	RST_SW_N	Reset Switch low reference pull-down to GND
6	PWR_SW_P	Power Switch high reference pull-up to +5V
7	RST_SW_P	Reset Switch high reference pull-up to +5V
8	PWR_SW_N	Power Switch low reference pull-down to GND
9	RSVD_DNU	Reserved. Do not use.

2-19