MSI Z77A-G45 Thunderbolt manual CPU & Cooler Installation

Page 23

MS-7752

CPU & Cooler Installation

When installing a CPU, always remember to install a CPU cooler. A CPU cooler is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and CPU cooler installation. Wrong installation can damage both the CPU and the mainboard.

1. Unhook and lift the loading lever to

2. The

loading

plate

should

the fully open position.

automatically lift up as the loading

 

lever is pushed to the fully open

 

position. Do not touch any of the

 

CPU socket pins.

 

 

Chapter 1

3.Line up the CPU to fit the CPU socket. Be sure to hold the CPU by the base with the metal contacts facing downward. The alignment keys on the CPU will line up with the edges of the CPU socket to ensure a correct fit.

4.Close the loading plate and remove the plastic protective cap.

Alignment Key

1-11

Image 23
Contents MS-7752 v2.x Mainboard Z77A-G45 Thunderbolt seriesRevision History Preface CE Conformity Korea Warning Statements Battery Information Weee Waste Electrical and Electronic Equipment Statement Español Türkçe Contents Appendix a Realtek Audio Page Getting Started Optional Accessories Packing ContentsChapter Assembly PrecautionsProcessor Support Mainboard SpecificationsForm Factor Connectors Quick Guide Contents Reference Guide LAN VGA Back Panel Quick GuideLAN Introduction to the LGA 1155 CPU CPU Central Processing UnitCPU & Cooler Installation Page Mainboard Hook Mounting Screw Holes JPWR2 ATX 8-pin Power Connector Power SupplyJPWR1 ATX 24-pin Power Connector Memory Dual -Channel mode Population RuleInstalling Memory Modules PCIe Peripheral Component Interconnect Express Slot Expansion SlotsVideo/ Graphics Cards Single Video Card InstallationAMD CrossFire Multi -GPU Technology Chapter Nvidia SLI Technology Choose this item SATA1~6 Sata Connector Internal ConnectorsCPUFAN,SYSFAN1~4 Fan Power Connectors JFP1, JFP2 Front Panel Connectors JAUD1 Front Panel Audio Connector JUSB1~3 USB 2.0 Expansion ConnectorsJCI1 Chassis Intrusion Connector JUSB4 USB 3.0 Expansion ConnectorJDLED3 Voice Genie Connector optional JTPM1 TPM Module connectorJCOM1 Serial Port Connector JTURBO1 MultiConnect Panel Connector optionalFV1 Voltage Checkpoints Connector optional JBAT1 Clear Cmos Jumper JumpersCpuphase LEDs LED Status IndicatorsDrivers and Utilities Total InstallerBios Setup Overview Press DEL key to enter Setup Menu, F11 to enter Boot MenuEntering Boot device priority bar General Help OperationSub-Menu Advanced System StatusPcie GEN3 Installed Page Occurred Save & Exit BootMS-7752 Eist Chapter Page Chapter MEMORY-Z Chapter ECO Browser Installing WinkiUtilities Chapter Updating the Bios with Live Update Security Page Realtek Audio Software panel overview Software ConfigurationAuto popup dialog Ix a AppendHardware Default Setting MS-7752 Backpanel audio jacks to 6-channel speakers diagram Page Intel RAID Introduction Ix B Append Using Intel Rapid Storage Technology Option ROMXXX.X GB RAID array by using the upper arrow XXXX-XXXXXXXX Press Y key to accept the volume deletion XXXX-XXXXXXXX Recovery Volume Options Installing Driver Ix B Append Main Menu Degraded RAID ArrayIx B Append System Acceleration optional Ix B Append Disk Port RST Synchronization optionalInstall Windows XP Notes Installing Windows XP with IDE Mode Creating a Intel Ahci Driver Disc Installing Windows XP with Ahci ModeInstalling the Windows XP Operating System