▶My OC Genie Long duration power limit
This field allows you to customize Long duration power limit for OC Genie function.
▶My OC Genie Long duration maintained
This field allows you to customize Long duration maintained for OC Genie function.
▶My OC Genie Short duration power limit
This field allows you to customize Short duration power imit for OC Genie function.
▶My CPU Core Voltage/ My OC Genie CPU I/O Voltage/ My OC Genie DRAM Voltage/ My OC Genie GPU Voltage
These items are used to specific the voltage of CPU, Memory, GPU and chipset for OC Genie function.
▶Current CPU Core Voltage/ Current CPU I/O Core Voltage/ Current DRAM Voltage/ Current GPU Voltage
These items show current CPU/ CPU I/O/ DRAM/ GPU voltage.
▶DRAM Reference Clock
This item allows you to specific the DRAM Reference Clock for CPU. Please note the overclocking behavior is not guaranteed.
▶DRAM Frequency
This item allows you to adjust the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶Adjusted DRAM Frequency
It shows the adjusted DRAM frequency.
▶Extreme Memory Profile (X.M.P)
This item is used to enable/disable the Intel Extreme Memory Profile (XMP). For further information please refer to Intel’s official website.
▶DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advanced DRAM Configuration”
▶Advanced DRAM Configuration Press <Enter> to enter the
▶Command Rate
This setting controls the DRAM command rate.
▶tCL
Controls CAS latency which determines the timing delay (in clock cycles) of starting a read command after receiving data.
▶tRCD
Determines the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less clock cycles, the faster the DRAM performance.