61401134/329 ingles 18/7/03 16:55 Página 15
Others hobs
•Remove the tap controls by pulling them upwards strongly.
•Light the burners at their minimum setting.
•Use a small screw driver to remove the screw on the right or centre of the plug of the gas key (turn left for a big flame and right for a small flame).
•Once the setting has been graduated check the the flame remains at its mini- mum setting when the control is brusquely turned between the maximum and the minimum setting.
Models CG
The only intervention necessary for the trans- formation is the replacement of the gas nozz- les and their setting.
TEKA INDUSTRIAL, S.A. will not accept res- ponsibility for incorrect hob operation in the gas transformation and regulation of minimum burner settings are not carried out by TEKA’s official Technical Service.
15