Operating the product
5.10 Starting the programme
Press the Start/Pause button to start the program. Start 
symbol will light up to indicate that the programme has started and “:” symbol in the middle of the remaining time will keep flashing. Drying and programme progress bar will be displayed alternately.
5.11.Progress of programme
5.12 Child Lock
Machine is equipped with a Child Lock which prevents interfering with the current programme flow by pressing any button.
To activate the Child Lock:
•Press and hold Childproof Lock button for 3 seconds.
•Child Lock symbol will appear on the display when the Child Lock is activated.
•All buttons except the On/Off/Cancel and Child Lock button on the control panel are deactivated when the Child Lock is active.
•Display symbols will not change even if the position of Programme Selection knob is changed while the child lock button is active.
•When the programme selection knob is turned and function buttons are pressed Child Lock warning will be displayed.
•To start a new programme after the current programme is over or to interrupt the current programme, the Child Lock should be deactivated.
To deactivate the childproof lock:
•Press and hold Child Lock button for 3 seconds.
•Child Lock is deactivated when the dryer is switched off and on with On/Off/Cancel button.
5.13Changing the programme after it has started
•After the dryer starts operation, you can change the selected programme and dry your laundry in a different programme.
•Press and hold Start / Pause button for 1 seconds to pause the programme.
•Select desired programme by turning the Programme Selection knob.
•Press the Start/Pause button to start the program.
Adding / removing laundry while the dryer is in operation
•In order to add or take out laundry after the drying programme has started:
•Press the Start/Pause button to switch the dryer to Pause mode. Drying process will pause.
•While in Pause mode, open the loading door, add or take out laundry and close the loading door.
•Press the Start/Pause button to resume the program.
C Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.
C You may repeat laundry adding or removing process as many times as you desire during drying. However, this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly. Therefore, it is recommended to add laundry before the drying programme has started.
Dryer / User Manual | 23 / 32 EN |
|
|