DEFY Landromain Electrlogic 850 manual Electrical Installation, Loading the Machine, Preparation

Page 6

ELECTRICAL INSTALLATION

The washing machine is designed to operate on a 230 Volt, 50 Hz, 15 Amp, AC power supply.

The machine should be connected to an earthed 3 pin wall socket.

If the power-cord should ever need replacing, use only a genuine cord available from the nearest Defy Service Centre.

The appliance must be earthed and the manufacturer and seller do not

accept responsibility for any damage due to incorrect electrical connection.

LOADING THE MACHINE

PREPARATION

Close all zippers, snaps and hooks to prevent them from snagging other articles.

Remove pins, and other hard items to prevent them from scratching the machine.

Empty all pockets and turn them inside out.

Turn down cuffs and turn synthetic knits inside out.

Tie strings and sashes so they will not tangle.

Treat spots and stains before washing.

SORTING

Mix large and small items in each load.

Separate heavily soiled items from lightly soiled ones.

Separate dark colours from light colours.

Separate colourfast items from non-colourfast ones.

Separate robust fabrics from delicate.

Separate whites from colours.

LOADING

Lift and fold the lid.

Arrange the articles to be washed loosely round the perimeter of the tub.

Load evenly as an off balance load may cause unnecessary vibrations.

Use a large load programme when washing permanent press garments. These items need more space to move than heavy items such as jeans and towels.

Do not overload the machine as this will result in poor cleaning, increased creasing and excessive lint formation.

Image 6
Contents Automatic TOPLoading WashingFeatures AccessoriesCongratulations Safety Precautions Installation Inlet Hoses Conventional TapsFor Threaded Taps Preparation Electrical InstallationLoading the Machine SortingFunctions of the Controls TempProgramme Selection Selecting the Wash Time Time Delayed StartCustomising Programmes Selecting the Number of RinsesBefore ANY of the Wash Options are Selected YOU Must First Adding Bleach Operating ProcedureLoading Detergent Adding SoftenerCleaning the Water Inlet Filter MaintenanceCleaning the Exterior CareTechnical Specifications Cleaning the Drain FilterTrouble Shooting Machine will not operate at all