DEFY Landromain Electrlogic 850 manual Time Delayed Start, Customising Programmes

Page 9

TIME DELAYED START

The wash cycle completion time may be delayed by 2 to 48 hours. This feature is particularly useful when you are at work and only want the machine to finish washing just before you arrive home.

To cancel the “time Delayed Start” press the power button. Wait five seconds before pressing the power button once more to resume.

EXAMPLE: To set a completion time 8 hours from the present, proceed as follows:

MODE

REMAIN

DELAY

 

Display

Set to 8

CUSTOMISING PROGRAMMES

REMAIN

8

Display

START

HOLD

MODE

CONTROL

SPIN ONLY

MODE

CONTROL

SPIN ONLY

MODE

CONTROL

SPIN ONLY

START HOLD

Press the POWER ON pad.

SELECTING THE WASH TIME

Press the Mode pad and the WASH light will illuminate. Repeatedly press the CONTROL pad to select 14, 18, 0, 6 or 10 minutes.

If you do not want a wash cycle, select the time at 0 minutes.

SELECTING THE NUMBER OF RINSES

Press the Mode pad and the RINSE light will illuminate. Repeatedly press the CONTROL pad to select 2, 3, 4, 0, or 1 rinse. If you do not want a rinse cycle, select the time at 0 rinse.

SELECTING THE SPIN TIME

Press the Mode pad and the SPIN light will illuminate. Repeatedly press the CONTROL pad to select 5, 7, 9, 0, 1 or 3 minutes.

If you do not want a spin cycle, select the time at 0.

Press the START / HOLD pad.

Image 9
Contents Loading TOPAutomatic WashingFeatures AccessoriesCongratulations Safety Precautions Installation Inlet Hoses Conventional TapsFor Threaded Taps Loading the Machine Electrical InstallationPreparation SortingTemp Functions of the ControlsProgramme Selection Customising Programmes Time Delayed StartSelecting the Wash Time Selecting the Number of RinsesBefore ANY of the Wash Options are Selected YOU Must First Loading Detergent Operating ProcedureAdding Bleach Adding SoftenerCleaning the Exterior MaintenanceCleaning the Water Inlet Filter CareCleaning the Drain Filter Technical SpecificationsMachine will not operate at all Trouble Shooting