Operating the machine continued
Washing
Plug the machine in and switch on at the wall socket.
Open the water tap.
Check that the drain hose is in position and is free of kinks.
1.Press the ON/OFF button.
2.Press the DOOR OPEN button.
3.Open the door.
4.Load washing into the machine, distributing it evenly and loosely in the drum.
DO NOT EXCEED THE MAXIMUM WASH LOAD AS DETAILED IN THE WASH GUIDE (page 10).
5.Close the door.
6.Rotate and set the programme selection knob in to the desired programme. (see the wash guide on page 10 ).
7.Select the desired spin speed.
8.Select the desired auxiliary functions.
9.Add detergents and additives to the relevant compartments in the detergent drawer.
10.Close the detergent drawer.
11.Push the power START / PAUSE / CANCEL button.
The start / pause indicator light will glow and the machine will commence with the se- lected wash cycle.
You may monitor the progress of the wash cycle by observing the Programme progress display. - Main wash - Rinse- Conditioner- Spin
Page 7