Teka CG Lux-86 3G AI TR AL CG Lux-60 4G AI manual Connecting the Gas, Connecting the Electricity

Page 15

are those that are included with the hob

-the ones that come with the oven can be discarded.

This cooker includes caps for all TEKA ovens except models RT-600 and RT-800. Caps for these two models should be requested from the distribution outlet or the appropriate TEKA official technical service.

Connecting the Gas

Connecting the hob to the gas mains should be done in compliance with the current installation standards and/or regu- lations, and by a qualified technician (an authorised installing engineer). The gas connection for these hotplates should be made with rigid piping, because the appliance is a stationery one, where it is destined for the EC market. The hob has a threaded connection of 1/2’’ in diameter (as per ISO 228-1 ) or 1/2’’ with a conical thread (as per ISO 7-1), depending on the regulations in the destination country.

For markets with an ISO 228-1 1/2’’ con- nection, a 10/12 mm copper pipe is provi- ded as an accessory for welding to the gas intake pipe.

Ventilation slots should also be made at the site in compliance with current norms. Connecting the hob’s gas intake to the mains should be done in compliance with the basic gas installation standards for residential premises.

TEKA assumes no responsibility for any malfunction or damage that arises from an incorrect or faulty installation.

In order that the hob is not damaged by tightening the nut on the gas connection pipe, a maximum torque of 300 cm * Kgf should be applied.

GB

When the gas connection has been made, the installation should be checked to ensu- re that it is completely sealed. If the check is done using air, care should be taken that the test pressure is no more than 200 g/cm² Where air is not available, soapy water should be applied to ensure that there are no leaks in the connections. Tes- ting should never be done using a flame.

When the hob has been installed, check that the burner minimums are properly adjusted. To do this, light the burners and check that they do not go out if you switch quickly from the maximum to the minimum.

Whenever the gas connection nut is remo- ved, its washer should be changed.

Connecting the Electricity

(Only hobs with automatic ignition or elec- tric hotplates)

Before connecting the hob to the electric mains, check that the voltage and fre- quency of the mains matches what is shown on the hob’s rating plate, which is located lower down, and on the guarantee certificate or, where appropriate, the tech- nical datasheet supplied, which should be kept together with this manual.

The connection is made via an omnipolar switch or plug where accessible, which is suitable for the intensity to be tolerated and which has a minimum gap of 3 mm between its contacts, which will ensure disconnection in case of emergency or when cleaning the hob. It should also be correctly earthed in line with current stan- dards.

The connection should include correct earthing, in compliance with current norms.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Glass GAS Hobs Page Contents / Inhalt / Table des Matières Utilisation et entretien InstallationPrésentation Informations techniquesCG.1 4G Introduction / Einführung / PrésentationCGC 4G / CGC 4G AI AL 5G AI CG-Lux-70 4G / CG-Lux-70 4G AI AL CG-Lux-86 3G AI TR AL / CG Lux-86 3G AI TR Safety instructions GB Guide to Using the Instructions BookletPositioning the hobs InstallationAnchoring the hob Positioning the ovenPage Hob CGC 4G AI AL Rear view of the Control PanelConnecting the Electricity Connecting the GasOther hobs Gas conversionTo replace the injectors, follow these ins- tructions Hobs CG.1 4G, CG.1 3G 1P, CGC 4GSecond Dimensions and powers GB Technical InformationModels See the APPLIANCE’S Rating Plate Common Features for ALL Models with GAS Burners Technical dataOn hob models CGC 4G, CG.1 4G and CG.1 3G 1P See fig Use and MaintenanceSpecial requirements before Starting for the first time Igniting the burnersTurn on the gas at the mains or turn the gas cylinder’s tap Turning on the electric Hotplates Safety system Components Using the hotplatesAnti-accidental turn system On gas controls Maintenance of the burners Suggestions for using Burners effectivelySuggestions for using Hotplates effectively Maintenance of the electric Hotplates CG.1 3G 1PCleaning and care Page Page Reminder GB If something doesn’t work

CG Lux-86 3G AI TR AL CG Lux-60 4G AI, CG Lux-70 5G AI CG Lux-70 5G AI TR specifications

The Teka CG Lux-70 5G AI, CG Lux-70 5G AI TR, CG Lux-86 3G AI TR AL, and CG Lux-60 4G AI stand out as key players in the advanced segment of home appliances, particularly in kitchen technology. These models incorporate cutting-edge features and innovative technologies designed to enhance user convenience and ensure culinary excellence.

The Teka CG Lux-70 5G AI features an advanced 5G connectivity option that enables seamless integration with smart home systems. Its AI capabilities allow for smart cooking adjustments based on real-time data, optimizing cooking times, and temperatures for various recipes. The intelligent interface provides users with an intuitive experience, allowing them to select cooking modes with ease. This model also includes self-cleaning technology, which significantly reduces maintenance efforts.

Complementing this is the CG Lux-70 5G AI TR, which retains many of the same features but includes additional functionalities tailored for professional-grade cooking. The enhanced heating elements ensure that users can achieve precise results across a wide range of culinary applications. With its sleek design and robust aesthetic, this model enhances kitchen decor while ensuring optimal performance.

Meanwhile, the CG Lux-86 3G AI TR AL is designed with versatility in mind. This model supports 3G connectivity, providing users with access to high-speed internet for recipe downloads, firmware updates, and remote control features. The aluminum casing not only adds durability but also improves heat retention during cooking processes. With its larger capacity, the CG Lux-86 is perfect for families or for those who entertain guests frequently, making meal preparation faster and more efficient.

Lastly, the CG Lux-60 4G AI combines functionality with an excellent interface. This model offers 4G connectivity, enabling features such as remote operation via smartphone applications. The user-friendly control panel is complemented by an interactive display that guides users through cooking processes. With its compact design, the CG Lux-60 is ideal for smaller kitchens or for those seeking an efficient cooking solution without compromising performance.

In summary, Teka's CG Lux series showcases the integration of smart technologies, connectivity options like 5G, 3G, and 4G, and innovative cooking features that cater to a wide audience. These appliances do not only enhance the cooking experience but also simplify kitchen chores, making them a perfect choice for modern households. Whether for everyday cooking or gourmet meal preparation, Teka's CG Lux series caters to every culinary need.
Top Page Image Contents