Teka CG Lux-70 5G AI CG Lux-70 5G AI TR, CG Lux-86 3G AI TR AL CG Lux-60 4G AI manual

GB

fig. 19

‘Burner in operation’ indicator

Knob position when not in use

Maximum gas position

Minimum gas position

*Turn on the gas at the mains or turn the gas cylinder’s tap.

*Press the control knob and at the same time turn it anti-clockwise to the On posi- tion (the spark symbol). When the gas ignites, keep the knob at this position for between 5 and 10 seconds to enable the safety thermocouple to work.

fig. 20

‘Burner in operation’ indicator Control indicator

Off position

Maximum gas position Minimum gas position Burner on position

* Set the control to the position required.

The ignition (ceramic and electrode) should be cleaned regularly and care- fully in order to avoid ignition problems. Check, too, that the grooves in the bur- ners have not become obstructed.

Use flat-bottomed pans and check that they sit squarely on the grid, so that when food boils the pan does not slip (do not use pans with a concave or convex base).

With hobs CG Lux-75 and CG Lux-86 you can use pans with a concave base (e.g. woks) on the grid that is designed for this use.

Only pans with a minimum diameter of 140

mmshould be used on each burner. If you wish to use a pan with a diameter of 120 mm or smaller, it should be placed on the auxiliary burner. On hobs CG Lux-75 and CG Lux-86, the grid accessory has to be used (element A in fig. 27).

Please note:

When the burners are in opera- tion or have recently been in operation, the hob will be hot in places and this can lead to burns. Children should be kept well away.

For safety reasons, we advise that the instructions provided by the gas supply company are followed and that the supply tap is turned off when the hob is not in use.

If a gas smell is noted, the gas intake to the hob should be shut off and the room ventilated. The gas installa- tion and the hob should also be chec- ked by a specialised technician.

The device shall not be operated

22