EN
BEFORE USING FOR THE FIRST TIME
1 • Removing packaging | For your peace of mind your vacuum cleaner is fitted with | |
Unpack your appliance and remove any unwanted stickers, | two safety check systems: for the bag (13 & 14) and for the | |
HEPA filter cassette (16). | ||
Keep your guarantee form and read the instructions | ||
Do not move the vacuum cleaner by pulling on the power | ||
carefully before using your appliance for the first time. | ||
cord, the appliance must be moved using its carrying | ||
| ||
2 • Advice and precautions | handle. Do not use the power cord for lifting the appliance. | |
Switch off and unplug your vacuum cleaner each time | ||
| ||
Each time before use, the power cord must be unwound | you’ve finished using it. Always switch off and unplug your | |
completely. | vacuum cleaner before maintaining or cleaning it. | |
Do not jam it and do not allow it to rub against sharp | Only use original Tefal or Wonderbag bags and filters. | |
edges. | Only useTefal original accessories. Check that all the filters | |
If you’re using an electrical extension, check that it is in | are correctly in place. | |
perfect condition and that it is suited to the power of your | If you experience difficulties getting hold of the | |
vacuum cleaner. Never unplug the appliance by pulling on | accessories and filters for this vacuum cleaner, please | |
the power cord. | contact Tefal customer services (you can find their contact | |
Never operate the vacuum cleaner without a bag in it and | details on the last page). | |
without its filtration system (cassette). |
|
USING THE APPLIANCE
1 • Assembling the elements of the appliance
Push the flexible hose into the vacuum inlet (Fig.1) and turn until it locks. To remove it, turn in the opposite direction and pull.
•Push the metal telescopic tube into the end of the power nozzle until you hear a locking ‘click’ (Fig.2) (to release it, push the locking button on the tube and remove it).
•Push the all floor type nozzle (22) into the end of the metal telescopic tube until you hear a locking ‘click’ (Fig.3) (to release it, push the locking button on the nozzle and remove it).
•Adjust the telescopic metal tube to the required length using the telescopic system (TELESCOPIC SYSTEM) (Fig.4)
Fit the appropriate accessory to the end of the metal telescopic tube or the power nozzle:
-For rugs and carpets: use the all floor type nozzle in the retracted brush nozzle position or the Turbobrush* (fibres and animal hairs).:
-For parquets and smooth floors: use the all floor type nozzle in the advanced position or, for a better result, use the parquet nozzle*.
-For corners and hard to reach spots: use the telescopic crevice tool*.
-For furniture and fragile surfaces: use the brush built into the power nozzle (EASY BRUSH) or the upholstery nozzle*.
IMPORTANT Never operate your vacuum cleaner without its bag and without its filtration system (cassette).
IMPORTANT Always switch off and unplug your vacuum cleaner before changing the accessories.
COMFORT TIPS
ERGO COMFORT SILENCE Chain
Comfortable to use, the ERGO COMFORT SILENCE range has been designed to make using your vacuum cleaner an easier and more enjoyable experience.
So that you can keep an upright position and avoid bending your back, make sure you:
1.Adjust the length of the metal telescopic tube ERGO COMFORT SILENCE to suit your body build (Fig.5).
2.Place your second hand in front of the power nozzle handle ERGO COMFORT SILENCE (Fig.6).
2 • Plugging in the power cord and switching on the appliance
Unwind the power cord completely, plug in your vacuum cleaner and press on the On/Off button (Fig.7).
Remark: you can use your vacuum cleaner in the horizontal position (sleigh position) but also in the vertical position, notably when you are vacuuming the stairs or removing dust from the curtains.
* Depending on models: either equipment specific to cer- |
|
tain models or available as an optional accessory. | 7 |
|