EN
Adjust the suction power:
⇨using the electronic power control (Fig.8) :
• Position |
|
|
| (MIN) for vacuuming delicate fabrics (net | ||
|
|
|
|
|
| curtains, textiles) |
• Position |
|
|
|
| (Medium) for everyday vacuuming for all | |
|
|
| ||||
|
|
|
|
|
| types of floors, which are only slightly |
|
|
|
|
|
| dirty |
• Position |
|
|
|
| (MAX) for vacuuming hard floors and | |
|
|
|
| |||
|
|
|
|
|
| very dirty rugs and carpets. |
⇨with the manual power nozzle switch :
open the power control flap in order to reduce the suction power manually and avoid the nozzle ”sticking” to the surface that has been vacuumed (Fig.9) e.g.: net curtains, fragile surfaces…
3 • Storing and carrying your vacuum cleaner
After use, switch off your vacuum cleaner by pressing the On/Off switch and unplug it (Fig.10). Rewind the power cord by pressing the power cord rewind button (Fig.11). In the vertical position place the nozzle in the parking position (Fig.12).
This allows you to carry and store your vacuum cleaner when it is in the parking position (Fig.13).
CLEANING AND MAINTAINING
The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen, smoke and animal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the respiratory system where they can cause inflammation and lung impairment.HEPA filters (High Efficiency Particulate Air) are used to filter out the smallest particles. With the HEPA filter, the air released back into the room is healthier than the air that is vacuumed.
IMPORTANT Always switch off and unplug your vacuum cleaner before servicing it.
1 • Changing the bag
The change bag light tells you that the bag is full or saturated. If you notice that your vacuum cleaner is not working as well as it should be, turn the power up to maximum and hold the lifted nozzle above the floor. If the light stays red, replace the bag.
a)If your vacuum cleaner is fitted with a Wonderbag* (18a) : IIMPORTANT Wonderbag* UNIVERSAL (Classic, Freshline, Endura ref. WB4xxx) bags are available from retail outlets and at Approved Service Centres.
IMPORTANT Wonderbag* COMPACT bags can’t be used on this appliance. Using them could damage the vacuum cleaner and may invalidate the appliance guarantee.
Open the cover to your vacuum cleaner (Fig.14).
Remove the bag support from the bag compartment (Fig.15).
Remove the Wonderbag* bag from the bag support (Fig.16). Throw the Wonderbag* bag away (Fig.17).
Place a new Wonderbag* bag in the bag support using its ring (Fig.18).
Place the bag support in the bag compartment and fit the bag inside the compartment (Fig.19).
Make sure that the bag is correctly positioned before closing the cover.
b) If your vacuum cleaner is fitted with a synthetic (textile) bag* (18b) :
Synthetic bags*
Open the cover to your vacuum cleaner (Fig.14).
Remove the bag support from the bag compartment (Fig.20). Remove the synthetic bag* from the bag support (Fig.21). Open the synthetic bag* using the zip (Fig.22) then empty it into a dustbin (Fig.23).
Check that the zip is properly closed once more before putting the bag back in again (Fig.24).
Place the synthetic bag* on the bag support using its cardboard holder (Fig.25), place the bag support in the bag compartment and fit the bag inside the compartment (Fig.26).
Make sure that the bag is correctly positioned before closing the cover.
IMPORTANT Never operate the vacuum cleaner without a bag.
For your peace of mind your vacuum cleaner is fitted with a safety system which tells you that the bag is inside (the cover won’t close unless you’ve put the bag in).
2 • Changing the HEPA* filter cassette (ref.
IMPORTANT Replace the filtration system once a year.
The HEPA filter cassette ref.
Open the cover to your vacuum cleaner (Fig.14). Remove the bag support from the bag compartment (Fig.15), then remove the HEPA* filter cassette (Fig.27) and throw the cassette into a bin (Fig.28).
* Depending on models: either equipment specific to cer- |
|
tain models or available as an optional accessory. | 8 |
|