NuTone CV352 manual Floor Inlet Installation, Model 330N Wall Inlet Installation

Page 10

MODEL 330N WALL INLET INSTALLATION

1.Make cutout according to dimensions in Figure 30.

2.Refer to Figure 31. Break off nail plate at scored line.

3.Refer to Figure 32. Glue elbow to mounting plate, place assembly into cutout, and attach elbow to tubing inside the wall.

4.Make sure mounting holes are exactly at top and bottom.

5.Connect 2-conductor low voltage wire to terminal screws on back of wall inlet.

6.Refer to Figure 33. Align inlet mounting holes with mounting plate holes, place inlet into mounting plate, and secure with provided screws. NOTE: If 382-S shorter radius elbow is used, it may be necessary to use the short mounting screw to avoid interference with elbow.

1/4"

23/4"

3/8" DIA.

37/8"

 

3/8" DIA.

1/4"

13/8"

FIGURE 30

FIGURE 31

MOUNTING

PLATE

ELBOW

MOUNTING

HOLE (2)

FIGURE 32

INLET

MOUNTING

PLATE

FIGURE 33

FLOOR INLET INSTALLATION

INSTALLATION IN NEW AND EXISTING CONSTRUCTION

1.Refer to Figures 34 and 35. After floor inlet location has been selected, cut a 31⁄16" x 29⁄16" square hole in floor. Center line of inlet must be located at least 21⁄2" from wall to allow cover to be opened when hose is inserted.

2.Determine direction of tubing and attach appropriate flanged fitting to mounting bracket with four (4) screws supplied. Be sure mounting bracket flange does not interfere with tubing and seal is securely in place.

3.Refer to Figure 36. Position bracket with frame and flanged fitting assembly into cutout from below and secure to sub floor.

4.Refer to Figure 37. Large end of Model 399 extension sleeve should be cut to length to allow proper seating of inlet against floor or carpet.

5.Refer to Figure 38. Pull Low Voltage 2-Conductor wire through mounting bracket and attach to terminal screws on back of floor inlet. Cement extension sleeve to Model 360 inlet. Insert extension sleeve through vinyl gasket in mounting bracket and firmly seat into flanged fitting.

6.For convenience of operation, floor inlet should be installed to open back toward wall.

7.Refer to Figure 36. Secure floor inlet in place with two screws.

TOP VIEW

29/16"

31/16"

 

MOLDING

 

 

 

WALL

FIGURE 34

 

 

 

 

 

 

 

 

 

 

 

 

10

SIDE VIEW

21/2" MIN.

 

APPROX.

 

MOUNTING BRACKET

 

FLANGE

FIGURE 35

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents BUILT-IN Central Cleaning System Model CV-352Ranch Style House General InformationLayout and Planning Examples TWO-STORY HouseLocating the Wall Inlets Locating the Power UnitSPLIT-LEVEL House TubingInstallation Hints Installation in NEW ConstructionInstalling the Tubing Wall Inlet ROUGH-INNail Plate Installation Tubing InstallationWall Inlet Installation Model 360 Wall INLET361 RoughDimensional Chart Power Unit InstallationTubing Connections Locating Access Keys Installation in Existing ConstructionLayout and Planning Flanged Model 330N Wall Inlet Installation Floor Inlet InstallationInstallation in NEW and Existing Construction Final System Check Two Year Limited Warranty

CV352 specifications

The NuTone CV352 is a premier central vacuum system designed for homeowners seeking efficiency, power, and convenience in their cleaning routines. This model is part of NuTone's esteemed CV series, which is known for its superior performance and reliability. With a powerful motor and an array of features, the CV352 is well-equipped to elevate your home cleaning experience.

One of the standout features of the NuTone CV352 is its robust motor, which delivers an impressive 550 air watts of suction power. This ensures that it can easily handle various types of debris, from fine dust to larger particles. The powerful motor not only improves cleaning efficiency but also reduces the need for frequent emptying, making it suitable for larger homes.

Another noteworthy aspect of the CV352 is its unique filtration system. It comes equipped with a high-efficiency particulate air (HEPA) filter, which captures 99.97% of particles as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it effectively minimizes allergens and improves indoor air quality. The filtration system is designed for easy maintenance, allowing homeowners to replace or clean filters with minimal effort.

The NuTone CV352 also integrates advanced sound-dampening technology, which significantly reduces the operational noise of the system. This feature is a game-changer for households that prioritize a peaceful environment, allowing users to enjoy a quieter cleaning experience without disturbing family members or pets.

Ease of use is another hallmark of the CV352. The central vacuum system comes with a variety of accessories, including a crevice tool, dusting brush, and upholstery nozzle, making it versatile for all cleaning tasks. Its wall-mounted design saves valuable floor space and the convenient on/off switch can be easily accessed from the hose handle, providing a seamless user experience.

Durability is a key characteristic of the NuTone CV352. Built with high-quality materials, it is designed to withstand the rigors of daily cleaning. The system is backed by a generous warranty, reflecting the manufacturer's confidence in its long-lasting performance.

In summary, the NuTone CV352 central vacuum system combines powerful suction, advanced filtration, reduced noise levels, and user-friendly features to create a superior cleaning solution for any home. Its thoughtful design and capabilities make it a worthwhile investment for those looking to enhance their home cleaning process.
Top Page Image Contents