NuTone CV352 manual Flanged

Page 9

4.Be sure tubing hole is centered in sole plate and directly in line with proposed wall inlet cutout.

NOTE: If 330 wall inlet is being used refer to Model 330 Wall Inlet Installation on next page.

5.If area is clear, cut an inlet opening in the wall approximately 18" above the floor. Make sure wall opening and 212" tube hole line up (Figure 25).

6.Cut a length of tubing that will extend from inlet opening to a point below floor level (or above ceiling level in attic installation). Tape low voltage wire to tube and insert tube through predrilled hole to a level opposite the wall opening.

7.Apply cement to tube and install flanged wall fitting. Make sure fitting is well seated and sealed (Figure 26).

8.Remove plaster frame from mounting bracket. Pull low voltage wire through hole in bracket and insert bracket into cutout. Secure bracket to flanged fitting with four screws provided. Be sure seal is secure between flange fitting and mounting bracket (Figure 27).

9.Starting from farthest wall inlet location, install each inlet as

described above. Working back toward power unit, connect each branch line into main trunk line. Complete low voltage wiring as main trunk line is continued back to power unit.

10.Attach the low voltage wires to terminal screws on back of wall inlet (Figure 28).

11.Insert wall inlet into bracket and secure with the two screws provided (Figure 29).

12.Mount power unit and complete wiring. See page 7.

3 1/16"

2 9/16"

21/2"

18"

FLANGED

FITTING

LOW

VOLTAGE

WIRING

FIGURE 26

FIGURE 27

FIGURE 25

NOTE: If the wall for mounting the Model 360 inlet is less than 12", a spacer must be used. See Figure 5A as a guide.

FIGURE 28

FIGURE 29

9

Image 9
Contents Model CV-352 BUILT-IN Central Cleaning SystemLayout and Planning Examples General InformationRanch Style House TWO-STORY HouseSPLIT-LEVEL House Locating the Power UnitLocating the Wall Inlets TubingInstalling the Tubing Installation in NEW ConstructionInstallation Hints Wall Inlet ROUGH-INTubing Installation Nail Plate InstallationModel 360 Wall INLET361 Rough Wall Inlet InstallationPower Unit Installation Dimensional ChartTubing Connections Installation in Existing Construction Locating Access KeysLayout and Planning Flanged Floor Inlet Installation Model 330N Wall Inlet InstallationInstallation in NEW and Existing Construction Final System Check Two Year Limited Warranty

CV352 specifications

The NuTone CV352 is a premier central vacuum system designed for homeowners seeking efficiency, power, and convenience in their cleaning routines. This model is part of NuTone's esteemed CV series, which is known for its superior performance and reliability. With a powerful motor and an array of features, the CV352 is well-equipped to elevate your home cleaning experience.

One of the standout features of the NuTone CV352 is its robust motor, which delivers an impressive 550 air watts of suction power. This ensures that it can easily handle various types of debris, from fine dust to larger particles. The powerful motor not only improves cleaning efficiency but also reduces the need for frequent emptying, making it suitable for larger homes.

Another noteworthy aspect of the CV352 is its unique filtration system. It comes equipped with a high-efficiency particulate air (HEPA) filter, which captures 99.97% of particles as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it effectively minimizes allergens and improves indoor air quality. The filtration system is designed for easy maintenance, allowing homeowners to replace or clean filters with minimal effort.

The NuTone CV352 also integrates advanced sound-dampening technology, which significantly reduces the operational noise of the system. This feature is a game-changer for households that prioritize a peaceful environment, allowing users to enjoy a quieter cleaning experience without disturbing family members or pets.

Ease of use is another hallmark of the CV352. The central vacuum system comes with a variety of accessories, including a crevice tool, dusting brush, and upholstery nozzle, making it versatile for all cleaning tasks. Its wall-mounted design saves valuable floor space and the convenient on/off switch can be easily accessed from the hose handle, providing a seamless user experience.

Durability is a key characteristic of the NuTone CV352. Built with high-quality materials, it is designed to withstand the rigors of daily cleaning. The system is backed by a generous warranty, reflecting the manufacturer's confidence in its long-lasting performance.

In summary, the NuTone CV352 central vacuum system combines powerful suction, advanced filtration, reduced noise levels, and user-friendly features to create a superior cleaning solution for any home. Its thoughtful design and capabilities make it a worthwhile investment for those looking to enhance their home cleaning process.