NuTone 9965 installation instructions For Best Results, Unit Dimensions, Wiring and Ductwork

Page 1

INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Heat-A-Ventlite®

(with Night Light)

MODEL: 9965

FOR BEST RESULTS

In a new construction site, install the housing (complete with heater and ventilator) during rough-in construction of the building. The light assembly and the grille should be installed when the finished ceiling is in place.

Installation in an existing, finished building requires an accessible area (attic or crawl space) above the planned location. See “INSTALLATION IN EXISTING CONSTRUCTION.”

Do not install closer than 12 inches to a vertical surface. Do not install over tub or shower enclosure.

UNIT DIMENSIONS

Refer to Figure 1 for housing's dimensions.

NOTE: If there will be a finished second floor above, the Model 9965 housing requires a minimum of 2" x 8" joist construction for mounting.

WIRING AND DUCTWORK

1.Run the required wiring during rough-in stage of construction.

2.Total connected load: 1730 watts.

3.Plan to run 120vAC, 60 Hz wiring (with ground) on a separate 20 Amp circuit from a power source, through the provided wall switch, to the housing's junction box. See wiring diagram.

4.Use 4" round duct.

INSTALLATION IN

NEW CONSTRUCTION

PREPARATION

1.Install hanger bar brackets in slots in housing. (See Fig. 3) Do not tighten completely to allow bars to be inserted.

2.Refer to Figure 2. Insert hanger bars into brackets.

3.Refer to Figure 3. Slide hanger bar brackets down to end of slot closest to outside edge of housing. Tighten brackets in this position.

4.Refer to Figure 4. Remove junction box cover by removing one screw.

5.Refer to Figure 4. Remove appropriate wiring knockout(s) and install approved box connector(s).

934"

734"

14"

FIGURE 1

HANGER BARS

FIGURE 2

JUNCTION

BOX

COVER

ADJUSTMENT

SLOT

KNOCKOUTS

FIGURE 3

FIGURE 4

Image 1
Contents Wiring and Ductwork Unit DimensionsInstallation NEW Construction For Best ResultsInstalling the Ductwork Mounting the HousingInstalling the Switch Installing and Connecting the WiringInstallation Installation Existing ConstructionHousing must be mounted between ceiling joists PlanningOne Year Limited Warranty 13a Parts List85585-000

9965 specifications

The NuTone 9965 is a state-of-the-art bathroom ventilation fan designed to blend efficiency with user-friendly features. Crafted to provide exceptional air circulation, it effectively removes humidity and odors from your bathroom, promoting a fresher and healthier environment. This ceiling-mounted fan boasts a modern design that complements various bathroom styles, ensuring that functionality does not come at the expense of aesthetics.

One of the standout features of the NuTone 9965 is its powerful motor, which operates quietly, providing ample airflow without disruptive noise. The fan operates at a sound level of just 1.5 sones, making it one of the quieter models available. This low noise level is particularly advantageous during nighttime usage or in shared spaces where peace is a priority.

Efficiency is another critical element of the 9965 model. With a CFM (cubic feet per minute) rating that ensures optimal air movement, this fan is capable of ventilating spaces of up to 105 square feet, making it suitable for medium-sized bathrooms. Additionally, the fan incorporates an energy-efficient design that meets strict energy efficiency guidelines, helping homeowners save on electricity bills while benefiting from a healthier indoor climate.

The NuTone 9965 also features a built-in light, enhancing bathroom visibility and utility. The integrated LED light is energy-efficient and long-lasting, providing bright illumination to the space. The fan light operates independently from the ventilation fan, allowing users to control both features based on their needs.

Installation of the NuTone 9965 is user-friendly, making it accessible for both experienced contractors and DIY enthusiasts. The fan comes with a convenient mounting bracket that simplifies the installation process, which is a valuable feature for those looking to upgrade their existing ventilation systems.

Moreover, the fan's stylish grille can seamlessly integrate with various bathroom decor styles. It is designed to resist discoloration and ensure durability over time.

In summary, the NuTone 9965 ventilation fan is a dependable choice for those seeking an effective, quiet, and stylish solution for maintaining air quality in their bathrooms. With its combination of advanced features, energy efficiency, and ease of installation, the NuTone 9965 is a worthy addition to any home. Whether you are upgrading your existing ventilation system or installing a new one, this fan stands out as a top contender in the market.