Mounting the Housing, Installing the Ductwork

MOUNTING THE HOUSING

1.Locate housing between joists.

2.Refer to Figure 5. Using nails, secure hanger bars to joist.

NOTE: The hanger bar brackets are adjustable.

Allowing for the thickness of the finished ceiling, mount hanger bars so that edge of housing will be flush with the finished ceiling.

3. Adjust brackets as required. Tighten brackets.

INSTALLING THE DUCTWORK

1.Refer to Figure 5. Install duct collar.

2.Using 4" round duct, connect duct to collar and tape connection.

INSTALLING THE SWITCH

1.Install double-gang switch box in chosen location.

2.Refer to Figure 6. Run wiring and make wiring connections.

3.Use supplied screws to secure switch bracket assembly to switch box.

4.Using supplied screws, secure wall plate to switch bracket.

INSTALLING AND CONNECTING THE WIRING

Refer to Figure 6.

All wiring must comply with local codes and unit must be properly grounded.

1.Using 12-gauge wire, run 120vAC, 60 Hz wiring (with ground) from a power source to the wall switch location.

The unit must be wired on a separate 20 Amp circuit.

2.Run wiring from switch location to housing as shown in the wiring diagram.

3.Make wiring connections as shown in wiring diagram.

4.Replace junction box cover. Slide slotted hole in cover over screw. Tighten screw securely.

5.Secure wire cover with one screw.

6.Insert heater and ventilator plugs into proper receptacles as shown.

DUCT COLLAR

FIGURE 5

MOUNTING THE GRILLE ASSEMBLY

1.Refer to Figure 7. Place the reflector into the grille.

2.Refer to Figure 8. Insert light plug and night light plug into receptacles.

3.Refer to Figure 7. Using two provided screws, secure grille and reflector to housing.

4.Install 100 watt (maximum) light bulb into light socket.

5.Install 7 watt (maximum) C-7 candelabra type bulb into night light socket.

6.Refer to Figure 9. Snap lens into place.

HEATER
JUNCTION BOX			HEATER
			HEATER
LIGHT			(WHITE)
BLK	WHT	WHT	RED
VENT			NIGHT
VENT			LIGHT
BLU	WHT	WHT	BLK
	WHT	WHT
			T
VENT			HEAT
LIGHT			NIGHT
			LIGHT
SWITCH
BOX
NOTE:	BLACK	GROUND WHITE
WHEN THERMOSTAT
OR TIMER IS USED,
CONNECT AT T
	120vAC		FIGURE 6
	LINE

GRILLE
			REFLECTOR
(LENS OMITTED
FROM DRAWING
FOR ILLUSTRATIVE
PURPOSES)			FIGURE 7
			FIGURE 7

9965 specifications

The NuTone 9965 is a state-of-the-art bathroom ventilation fan designed to blend efficiency with user-friendly features. Crafted to provide exceptional air circulation, it effectively removes humidity and odors from your bathroom, promoting a fresher and healthier environment. This ceiling-mounted fan boasts a modern design that complements various bathroom styles, ensuring that functionality does not come at the expense of aesthetics.

One of the standout features of the NuTone 9965 is its powerful motor, which operates quietly, providing ample airflow without disruptive noise. The fan operates at a sound level of just 1.5 sones, making it one of the quieter models available. This low noise level is particularly advantageous during nighttime usage or in shared spaces where peace is a priority.

Efficiency is another critical element of the 9965 model. With a CFM (cubic feet per minute) rating that ensures optimal air movement, this fan is capable of ventilating spaces of up to 105 square feet, making it suitable for medium-sized bathrooms. Additionally, the fan incorporates an energy-efficient design that meets strict energy efficiency guidelines, helping homeowners save on electricity bills while benefiting from a healthier indoor climate.

The NuTone 9965 also features a built-in light, enhancing bathroom visibility and utility. The integrated LED light is energy-efficient and long-lasting, providing bright illumination to the space. The fan light operates independently from the ventilation fan, allowing users to control both features based on their needs.

Installation of the NuTone 9965 is user-friendly, making it accessible for both experienced contractors and DIY enthusiasts. The fan comes with a convenient mounting bracket that simplifies the installation process, which is a valuable feature for those looking to upgrade their existing ventilation systems.

Moreover, the fan's stylish grille can seamlessly integrate with various bathroom decor styles. It is designed to resist discoloration and ensure durability over time.

In summary, the NuTone 9965 ventilation fan is a dependable choice for those seeking an effective, quiet, and stylish solution for maintaining air quality in their bathrooms. With its combination of advanced features, energy efficiency, and ease of installation, the NuTone 9965 is a worthy addition to any home. Whether you are upgrading your existing ventilation system or installing a new one, this fan stands out as a top contender in the market.