NuTone H-910W installation instructions Location, Mounting Junction BOX, Wiring

Page 1

INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

Radiant Ceiling Heater

(single-bulb heat lamp)

MODEL: H-910W

LOCATION

Heater is to be located in ceiling of bathroom, mounted to junction box installed on a ceiling joist, or if necessary on a header between joists.

CAUTION: Do not mount heater closer than 8" to a vertical surface. Do not mount heater over tub or in shower stall enclosure.

MOUNTING JUNCTION BOX

(refer to specific section below)

When Ceiling Is In Place (see Figure 1)

1.Check attic or crawl space for wiring or other possible obstruction to junction box. Return to bathroom and drill a pilot hole through ceiling at the proposed location.

2.Locate the pilot hole in attic. Position a standard 4" octagon junction box over pilot hole and next to ceiling joist. If ceiling joist is not adjacent to pilot hole, install a header between joists for mounting the junction box.

3.Mark ceiling for cutout, using the junction box as a template. Make cutout in ceiling along outline of junction box.

4.Run wiring to junction box (see WIRING section), then mount box to joist or header, keeping edge of box flush to ceiling.

When Mounting To Open Joist (see Figure 1)

Mount standard 4" octagon junction box to ceiling joist, or to header.

WIRING

1.Heater may be wired to an existing lighting circuit, or run a 120vAC, 60Hz, 15 Amp circuit through a wall switch to ceiling junction box (switch not included, see

ACCESSORIES).

2.Remove wiring knockout from junction box and install a box connector. Feed wires through box connector, leaving about 6" of wire in box for connections.

CAUTION: Be sure heater is properly grounded and all wiring complies with local electrical code.

JUNCTION BOX

BOX

CONNECTOR

FIGURE 1

GROUND

WHITE

BLACK

MOUNTING

PLATE

CEILING

PLATE

FIGURE 2

Image 1
Contents Location WiringMounting Junction BOX Nutone Accessory Switches Install BulbMounting Heater

H-910W specifications

The NuTone H-910W is a high-performance ceiling-mounted vent fan designed to deliver efficient ventilation and quiet operation in residential and commercial spaces. This versatile model effectively removes excess moisture, smoke, and odors, enhancing indoor air quality and creating a comfortable environment.

One of the standout features of the NuTone H-910W is its ultra-quiet operation. Equipped with a powerful motor and advanced noise-reduction technology, it ensures that the fan operates at a remarkably low sound level, making it suitable for use in areas such as bathrooms, kitchens, and laundry rooms where noise can be disruptive. With a quiet rating of just 1.5 sones, it allows for peaceful living without compromising on performance.

The H-910W boasts a 70 CFM airflow capacity, providing sufficient ventilation for spaces up to 70 square feet. This makes it ideal for small to medium-sized rooms, effectively exhausting humidity and preventing mold and mildew buildup. Its robust yet efficient motor ensures reliable performance, even during prolonged use, making it a dependable choice for regular ventilation tasks.

Another significant characteristic of the NuTone H-910W is its sleek, unobtrusive design. The white polymeric grille seamlessly blends with any ceiling décor, maintaining an elegant aesthetic while providing essential functionality. It is also easy to install, featuring a simple mounting system that allows for quick and hassle-free setup.

In addition to its performance and design, the H-910W is equipped with a built-in light fixture, offering both functionality and convenience. The integrated light accommodates standard 60-watt bulbs, adding brightness to bathrooms and utility spaces. This dual-purpose feature reduces the need for additional lighting fixtures, making it a smart choice for homeowners seeking efficiency.

Moreover, the NuTone H-910W incorporates easy-to-replace components, ensuring that maintenance is straightforward and user-friendly. The fan's motor and other internal parts can be accessed without the need for professional assistance, promoting longevity and ease of operation.

Overall, the NuTone H-910W combines advanced ventilation technology with user-friendly features, making it an excellent choice for anyone seeking a reliable and quiet solution to indoor air quality management. Its thoughtful design, powerful performance, and additional lighting functionality make it a valuable addition to any home or commercial space.