NuTone H-910W installation instructions Mounting Heater, Install Bulb, Nutone Accessory Switches

Page 2

MOUNTING HEATER

1.Remove heater mounting plate taped to ceiling plate.

2.Refer to Figure 2. Pull wires through mounting plate and make connections to house wires, using wire connectors.

Connect heater black wire to house black; heater white to house white. Connect earth ground wire to heater ground wire.

3.Refer to Figure 2. Fasten mounting plate to junction box through slots in mounting plate.

4.Refer to Figure 3. Position heater over mounting plate, lining up holes in heater ceiling plate with those in mounting plate, then fasten in place with provided screws.

INSTALL BULB

Install a 150-watt R-40 or 250-watt R-40 heat resistant glass, infrared type lamp (not furnished).

NUTONE ACCESSORY SWITCHES

Model VS-62 – 60 minute timer, installs in a single gang outlet box.

Model VS-63 – 15 minute timer, installs in a single gang outlet box.

FIGURE 3

One Year Limited Warranty

WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one (1) year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one year period, NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES, FILTERS, DUCT, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by NuTone), faulty installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the one year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

WARRANTY SERVICE: To qualify for warranty service, you must (a) notify NuTone at the address stated below or telephone 1/800-543-8687, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

Date of Installation

Builder or Installer

 

 

Model No. and Product Description

 

 

IF YOU NEED ASSISTANCE OR SERVICE:

 

For the location of your nearest NuTone Independent Authorized Service Center:

 

Residents of the contiguous United States Dial Free 1-800-543-8687

 

Please be prepared to provide:

 

Product model number • Date and Proof of purchase • The nature of the difficulty

Residents of Alaska or Hawaii should write to: NuTone Inc. Attn: Department of National Field Service, 4820 Red Bank Road, Cincinnati Ohio 45227-1599.

Residents of Canada should write to: Broan-NuTone Canada, 1140 Tristar Drive, Mississauga, Ontario, Canada L5T 1H9.

Rev. 03/2001

 

4820 Red Bank Road, Cincinnati, Ohio 45227

Product specifications subject to change without notice.

Printed in U.S.A., Rev. 4/01 Part No. 68618

Image 2
Contents Mounting Junction BOX WiringLocation Mounting Heater Install BulbNutone Accessory Switches

H-910W specifications

The NuTone H-910W is a high-performance ceiling-mounted vent fan designed to deliver efficient ventilation and quiet operation in residential and commercial spaces. This versatile model effectively removes excess moisture, smoke, and odors, enhancing indoor air quality and creating a comfortable environment.

One of the standout features of the NuTone H-910W is its ultra-quiet operation. Equipped with a powerful motor and advanced noise-reduction technology, it ensures that the fan operates at a remarkably low sound level, making it suitable for use in areas such as bathrooms, kitchens, and laundry rooms where noise can be disruptive. With a quiet rating of just 1.5 sones, it allows for peaceful living without compromising on performance.

The H-910W boasts a 70 CFM airflow capacity, providing sufficient ventilation for spaces up to 70 square feet. This makes it ideal for small to medium-sized rooms, effectively exhausting humidity and preventing mold and mildew buildup. Its robust yet efficient motor ensures reliable performance, even during prolonged use, making it a dependable choice for regular ventilation tasks.

Another significant characteristic of the NuTone H-910W is its sleek, unobtrusive design. The white polymeric grille seamlessly blends with any ceiling décor, maintaining an elegant aesthetic while providing essential functionality. It is also easy to install, featuring a simple mounting system that allows for quick and hassle-free setup.

In addition to its performance and design, the H-910W is equipped with a built-in light fixture, offering both functionality and convenience. The integrated light accommodates standard 60-watt bulbs, adding brightness to bathrooms and utility spaces. This dual-purpose feature reduces the need for additional lighting fixtures, making it a smart choice for homeowners seeking efficiency.

Moreover, the NuTone H-910W incorporates easy-to-replace components, ensuring that maintenance is straightforward and user-friendly. The fan's motor and other internal parts can be accessed without the need for professional assistance, promoting longevity and ease of operation.

Overall, the NuTone H-910W combines advanced ventilation technology with user-friendly features, making it an excellent choice for anyone seeking a reliable and quiet solution to indoor air quality management. Its thoughtful design, powerful performance, and additional lighting functionality make it a valuable addition to any home or commercial space.