Maytag HRX52DERS, HRX30DERT, HRX52DERT, HRX66DERT manual Draining, Thermostat Removal/Replacement

Page 17

Service and Maintenance (cont’d)

Draining

The water heater should be drained if being shut down during freezing temperatures. Also periodic draining and cleaning of sediment from the tank may be necessary.

1.Before beginning turn “OFF” the electric power supply to the water heater.

WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. Failure to do this could result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

2.CLOSE the cold water inlet valve to the water heater.

3.OPEN a nearby hot water faucet and leave open to allow for draining.

4.Connect a hose to the drain valve and terminate to an ade- quate drain or outdoors.

5.OPEN the water heater drain valve to allow for tank draining.

NOTE: If the water heater is going to be shut down and drained for an extended period, the drain valve should be left open with hose connected allowing water to termi- nate to an adequate drain.

6.Close the drain valve.

7.Follow “Filling the Water Heater” instructions in the “Instructions for Installation” section.

Thermostat Removal/Replacement

1.Turn “OFF” the electrical power to the water heater at the junction box.

WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. Failure to do this could result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

2.Remove the access panel and the insulation block and pad.

3.Lift out the tab as shown below to unclip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.

Lift out tab to unclip terminal cover from thermostat.

LOWER THERMOSTAT

UPPER OR LOWER

WITHOUT HIGH LIMIT

THERMOSTAT WITH

 

HIGH LIMIT

8. Turn “ON” power to the water heater.

CAUTION

Never use this water heater unless it is completely full water. To prevent damage to the tank and heat- ing element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

4.Remove the two wires attached to the thermostat.

5.Remove the thermostat from behind the thermostat bracket.

6.Disconnect wires from thermostat and slide out of the bracket.

7.Place the new lower thermostat in the bracket making sure it fits firmly against the tank.

8.Attach the wires to the new thermostat.

NOTE: Some of the terminals may require straight-in wiring through an eye-opening. If wires are now looped, re- cut and strip wire 3⁄8″ to a straight length and insert.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Electric Water Heater USER’S Guide DEATH, Serious Bodily INJURY, or Property Damage Safety InstructionsSafety Instructions cont’d Table of Contents Customer Information HRX30DERT HRX40DERS HRX40DERT HRX52DERS Product SpecificationsAccessories Accessories and Tools NeededAdditional Tools Needed When Sweat Soldering ToolsRemoving the Old Water Heater Instructions for InstallationTypical Installation Instructions for Installation cont’dLocating The New Water Heater Check ALL Connections for LeaksValve and Pipe Insulation Water PipingTion of production of listed equipment or materials Temperature-Pressure Relief ValveFilling the Water Heater Wiring DiagramsLength in any ground return path does not exceed 6 feet WiringModel Rating Plate Installation ChecklistTemperature Regulation Service and MaintenanceTemperature Settings ThermostatsThermostat Adjustments Service and Maintenance cont’dTemperature-Pressure Relief Valve Operation Anode Rod InspectionDraining Thermostat Removal/ReplacementThermostat Removal cont’d Element Cleaning ReplacementService and Maintenance cont’d Service Element Cleaning Replacement cont’dDrain Valve Washer Replacement Operational Conditions TroubleshootingStart Up Conditions Not Enough or no HOT Water Troubleshooting cont’dLY INJURY, or Property Damage Leakage CheckpointsHRX52DERS Repair Parts ListMaytag Electric Water Heaters Model Numbers HRX40DERS Description Part Numbers Repair Parts List cont’dKEY Part HRX40DERT Maytag Electric Water Heaters Model Numbers HRX30DERTHRX52DERT HRX66DERTHRX40DERT State / Maytag Part Number Conversion KEY Statemaytag Page Page Page Full ONE Year Warranty Warranty

HRX40DERS, HRX82DERT, HRX40DERT, HRX52DERS, HRX66DERT specifications

The Maytag HRX series, comprising the HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models, is designed for those seeking high-quality refrigeration solutions that combine reliability, innovative features, and advanced technology. Each model in this series showcases an array of characteristics that cater to the evolving needs of modern households.

One of the standout features of the Maytag HRX series is its powerful cooling performance, which is achieved through the use of Precision Cooling technology. This technology ensures that your food remains fresh for longer by maintaining optimal humidity levels and temperatures. With a dedicated cooling system, the HRX models effectively reduce temperature fluctuations, preserving the quality and longevity of your groceries.

Another key characteristic of the Maytag HRX series is the SmartSeal design that prevents air leaks and enhances energy efficiency. This feature not only helps to save on energy bills but also contributes to the appliance's overall sustainability. The Energy Star certification found in these models indicates adherence to strict energy efficiency guidelines, ensuring that users enjoy lower environmental impact without compromising performance.

The internal configuration of each model offers adjustable shelving and custom storage options to maximize space. The slide-out shelves provide easy access, while the spacious compartments cater to various food items. The inclusion of bins dedicated to fruits and vegetables ensures that perishables are organized and easily accessible.

The HRX series also boasts advanced temperature management systems. Users can enjoy the convenience of an external temperature display, allowing for quick adjustments without the need to open the refrigerator door. This feature not only increases efficiency but also contributes to maintaining optimal storage conditions.

In terms of durability, the Maytag HRX refrigerators are equipped with robust materials, including stainless steel finishes and reinforced hinges. These constructions ensure that the appliances withstand daily use while maintaining a modern aesthetic that complements any kitchen decor.

In summary, the Maytag HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models are exemplary choices for anyone seeking reliable refrigeration. With features like Precision Cooling, SmartSeal design, generous storage options, and user-friendly technology, they are built to exceed user expectations while providing an energy-efficient and durable solution for preserving food freshness. Whether for a large family or a smaller household, the HRX series caters to various needs and preferences, making them a valuable addition to any kitchen.
Top Page Image Contents