GAS Piping, Water Piping | Raypak B-195 specs

GAS PIPING

The gas inlet pipe size is 1/2" NPT to the gas valve. Provide an adequate size gas supply line. The line should not be smaller than 1/2" NPT according to the chart below.

MAXIMUM EQUIVALENT PIPE LENGTH (FEET)

		Pipe Size
Gas	1/2"		3/4"	1"
Natural	5		30	100
Propane			70	180

Gas piping must have a sediment trap ahead of the heater gas controls and a manual shut-off valve lo- cated outside the jacket. A manual shut-off valve is provided loose and must be installed at the site.

The heater and its gas connection shall be leak tested before placing the heater in operation.

The heater and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa).

The heater must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

Dissipate test pressure from the gas supply line before re-connecting the heater and its manual shut-off cock to the gas supply line. FAILURE TO FOLLOW

THIS PROCEDURE MAY DAMAGE THE GAS VALVE. OVER PRESSURED GAS VALVES ARE NOT COV- ERED BY THE WARRANTY. The heater and its gas connections shall be leak tested before placing the appliance in operation. Use soapy water for leak test. DO NOT use open flame.

NOTE: DO NOT use teflon tape on gas line pipe threads. A flexible sealant suitable for use with Natural and Propane gases is recommended.

Fig. # 8984

GAS PRESSURE SPECIFICATIONS

	Inches	W.C.
Gas	Min	Max	Manifold
Natural	4.5	10.5	3.5
Propane	11.0	14.0	10.0

The maximum inlet gas pressure must not exceed the value shown above. The minimum gas pressure shown is for the purposes of input adjustment.

The gas valve is provided with a pressure tap to measure the gas pressure downstream, which is also the manifold pressure.

WATER PIPING

The inlet and outlet water connections are 3/4 in. NPT. A water pressure regulator is shipped loose with the heater. Install, as needed, between the booster heater and dishwasher lines. Adjust setting to maintain 20 PSI at the dishwasher.

Install a suitable water hammer arrester be- tween the booster heater and dishwasher, as shown on page 10, typical piping.

B-195 specifications

The Raypak B-195 is a prominent model in the realm of heating solutions, specifically designed for residential and commercial applications. Known for its robust construction and high efficiency, the B-195 seamlessly combines reliability with advanced technology. This model is particularly favored in the pool and spa industry, as well as for hydronic heating systems.

One of the standout features of the Raypak B-195 is its compact design, which allows for easy installation in tight spaces. Despite its smaller footprint, the B-195 does not compromise on performance. It has a btu output of 195,000, making it suitable for both heating large pools and providing adequate heating for homes. The B-195 operates on natural gas, which is both cost-effective and environmentally friendly, promoting greener living solutions.

The unit incorporates a user-friendly digital display and control panel, enabling users to set and adjust temperatures with ease. Its advanced microprocessor control technology ensures accurate temperature regulation and efficient operation. Among the technological highlights is the patented Raypak Cupro-Nickel heat exchanger, which not only enhances the heat transfer efficiency but also extends the lifespan of the unit. This material is highly resistant to corrosion, ensuring durability and reducing maintenance needs.

The B-195 also features an exceptional flow sensing system that automatically adjusts the heater operation based on the water flow rate. This dynamic response ensures optimal performance while preventing overheating, enhancing overall safety. Additionally, the unit comes equipped with a high-efficiency ignition system, allowing for quick starts and consistent heat output.

Another significant aspect of the Raypak B-195 is its compatibility with various automation systems, facilitating smart pool management. This allows users to integrate the heater with their existing pool control systems, enabling remote monitoring and control via smart devices.

In terms of energy efficiency, the B-195 meets and often exceeds industry standards, providing a commendable energy factor. This translates to lower operating costs and reduced environmental impact, making it an ideal choice for energy-conscious consumers.

Overall, the Raypak B-195 stands as a testament to innovation in heating technology, offering a blend of efficiency, reliability, and convenience. Whether for a luxury pool or essential home heating, the B-195 delivers outstanding performance tailored to meet diverse heating needs.