GB | Specifications: | |
| • Talk time up to 10 hours/standby time up to 300 hours | |
CN | • Rechargeable battery with charging option from AC power supply, PC via | |
|
| USB cable or car charger (not included) |
CN | • | Weight 16 grams |
• | Battery indicator | |
JP | • Operating range up to 33 feet (approx. 10 meters) | |
• Headset and | ||
•Bluetooth specification (see glossary) version 2.0
KR 4. Getting started
TH The Jabra BT5020 is easy to operate. The answer/end button on the headset performs the different functions depending on how long you press it.
MA |
|
|
| Instruction: | Duration of press |
| Tap | Press briefly |
| Double Tab | 2 quickly repeated Taps |
| Press | Approx: 1 second |
| Press and hold | Approx: More than 3 seconds |
|
|
|
1) Charge your headset
Make sure that your Jabra BT5020 headset is fully charged before you start using it. Use the AC adapter to charge from a power socket, or charge directly from your PC with the USB cable provided. Connect your headset as shown in fig. x. When the LED is solid red, your headset is charging. When the LED is green, it is fully charged.
Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.
2)Turning your headset on and off
•Press the on/off/pairing button to turn on your headset. The LED will show a green flash when the headset is on.
•Press and hold the on/off/pairing button to turn off your headset. The LED will turn red when headset is off.
3)Pair it with your phone
Before you use your Jabra BT5020, you need to pair it with your mobile phone. The first time you turn on your Jabra BT5020 it will automatically go in to pairing mode. If you wish to pair again at a later date, follow the instructions below. (Follow step
A. Put the headset in pairing mode
•Make sure the headset is off .
•Press and hold the answer/end button until a solid blue light comes on.
B. Set your Bluetooth phone to ‘discover’ the Jabra BT5020 | GB | |
Follow your phone’s instruction guide. This usually involves going to a |
| |
‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and selecting the | CN | |
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a | ||
| ||
typical mobile phone in fig. 3) | CN | |
| ||
| JP | |
| KR | |
| TH | |
C. Your phone will find the Jabra BT5020 | MA | |
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ | ||
or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). |
|
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.
5. Wear it how you like it
The Jabra BT5020 is ready to wear on your right ear. If you prefer the left, gently rotate the ear piece to fit left ear. See fig. 4.
For optimal performance, wear the Jabra BT 5020 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone.
6. How to...
Answer a call
•Tap the answer/end button on your headset to answer a call.
End a call
•Tap the answer/end button to end an active call.
Make a call
•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra BT5020’s answer/end button to transfer the call to the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialling*
•Press the answer/end button. For best results, record the
Jabra BT5020 Bluetooth headset | |
|