Raypak 1505, 2005 brochure Xtreme Versatility, Can be installed indoor or outdoors

Page 4

Xtreme Versatility

Can be installed indoor or outdoors!

1

2

3

4

5

6

7

8

9

2

3a

Internal Air Intake

1.High Voltage Wiring Box 120VAC connections.

2.Removable Air Filter

Provides easy access and is easily removable for inspection and replacement. 12”x20”high capacity filter is rated MERV 8 (95% - 98% arrestance.)

3. Direct Vent Capability

Every XTherm is direct vent capable. By installing the optional vent pipe adapter (D-18) and air plenum plug, your XTherm is ready for direct vent. This makes it ideal for storage of pool chemicals in the same room as the XTherm. Damaging chemicals are not in contact with the heat exchanger or combustion chamber.

3a. Outdoor Cover

If your job requires outdoor installation, an optional air

vent plug easily screws on to cover the direct vent air intake. The combustion air will then be drawn from inside the heater through screened plenum openings. See photo above right.

4. Gas Inlet

The XTherm will operate at 100% full rate with gas pressures as low as 4.0”w.c.

5.Water Outlet

6.Water Inlet

The XTherm can accept as low as 50°F continuous inlet water temperature without damage to the primary heat exchanger.

7. Access Panel to Cold Run Pump

Easily removable access panel even when unit is

plumbed in place. Provides full access to inspect and service the Cold Run Pump system and condensate drain switch.

8. Flue Outlet

The stainless steel flue outlet is compatible with AL29- 4C. For a dramatic cost reduction over Category IV stainless steel, PVC or CPVC vent material may be used in conjunction with the D-32 vent option.

9. Condensate Drain

3/4”NPT PVC connection for condensate removal. Raypak offers optional condensate neutralizer kits (Z-

12)that can be plumbed between the heater and the drain.

4

Image 4
Contents Page Xtreme Performance 97%thermal efficiencyLow Voltage Wiring Terminal Flow SwitchVent Pressure Switch Combustion Air FanCan be installed indoor or outdoors Xtreme VersatilityXtremely Small Footprint For propane gas, all models are 1-1/4 NPTXtreme Pumping Cold Water Run System000,000 $26,243 $22,039 $20,712 $16,898 000,000 $80,653 $66,424 $62,047 $49,756Simple Serviceability On-Board Diagnostic CenterDiagnostic Information Xtreme ControlGAS
Related manuals
Manual 12 pages 19.26 Kb

2005, 1505 specifications

Raypak is a prominent name in the heating industry, known for its innovative and efficient heating solutions for residential and commercial applications. The models 2005, 1005, and 1505 are notable offerings from Raypak, each designed to provide reliable performance, energy efficiency, and user-friendly operation.

The Raypak 2005 model stands out for its robust construction and high efficiency. It utilizes advanced technology to ensure consistent heating and reliability. With a high-capacity output, the 2005 is ideal for larger pools and spa applications, efficiently maintaining desired temperatures even during colder months. Its digital control system allows for precise temperature settings, enabling users to customize their heating needs effectively.

The 1005 model is an excellent choice for medium-sized pools and spas, offering a perfect balance of power and energy efficiency. One of its key features is the ability to operate quietly, making it suitable for residential areas where noise can be a concern. The 1005 employs a reliable gas burning system that maximizes fuel efficiency and provides fast heating. Its compact design also makes it easy to install, saving space while delivering exceptional performance.

The Raypak 1505 model is designed for versatility, catering to a wide range of heating requirements. One of its standout characteristics is its corrosion-resistant heat exchanger, which ensures long-lasting performance even in harsh environments. The 1505 also incorporates a user-friendly digital interface, allowing for easy operation and monitoring of temperature settings. It supports both natural gas and propane, providing flexibility to users based on their energy source preferences.

All three models—the 2005, 1005, and 1505—benefit from Raypak's commitment to energy efficiency. They are designed to meet stringent environmental standards while minimizing operational costs for the user. Additionally, their reliable safety features, such as pressure switches and safety valves, ensure safe operation across various conditions.

In summary, Raypak's 2005, 1005, and 1505 models exhibit a combination of efficiency, durability, and user-friendliness. With their advanced technologies and adaptable designs, these heaters are suitable for a wide array of heating applications, providing users with reliable solutions for their heating needs. Whether for residential or commercial use, Raypak's commitment to quality and innovation makes these models excellent choices for anyone seeking dependable heating solutions.