Raypak RHP 33 installation manual Initial Start-Up and Check

Page 7

Indicator Lamps: There are 6 indicator lamps located on the unit control panel:

Control panel

Indicator lamps

When this lamp is lit, unit requires service.

When any combination of these 5 lamps is lit, operation is normal.

•Power (amber lamp): When lit, indicates power is applied to the unit.

•Water Flow (green lamp): When lit, indicates normal water flow.

•Heat Demand (green lamp): When lit, indicates the actual water temperature is below the target water temperature.

•Compressor Delay Active (amber lamp): Under normal operation, when lit, indicates compressor anti-short cycle timer is active. The fan will run but the compressor will be OFF for 6 to 8 minutes.

•Defrost Active (red lamp): When lit, indicates unit is in defrost mode. Defrost mode occurs when ice starts to form on the outside coil. The fan will continue to run but the compressor will stay OFF (not heating) until weather conditions improve.

•Low Pressure (red lamp): When lit, indicates failure in the refrigeration circuit. When this lamp is ON, service is required. Call the number shown in the CONTACT INFORMATION at the front of this manual.

V.Initial Start-Up and Check

1.Verify that the Power lamp is ON and that the pool pump is running and circulating properly.

2.Verify that the control panel Spa-Remote-Poolswitch is in the Remote (OFF) position; see the figure.

3.Turn the control switch to either Pool or Spa to turn the system ON and raise the thermostat setting above the current water temperature. At this time the 2 green lamps should illuminate. The fan and compressor should start up and run simultaneously.

4

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Owner Product Safety Signs and Labels Owner and Installation Manual Introduction InstallationII. Electrical Connections Typical System Electrical Power RequirementsIII. Water Connections IV. Controls and Indicator LampsInitial Start-Up and Check VII. Heat Pump Running Time VI. Seasonal Start-Up or Annual CheckVIII. Summer Shutdown MaintenanceIX. Freeze Protection Unit is RUNNING, but not Heating XI. TroubleshootingUnit is not Running Power Supply Water Plumbing DiagramsTB1 Heat Pump Schematic112 Control Panel Assembly Replacement Parts ListFront Back Control Panel Cover Assembly Replacement Parts ListItem QTY Description Heat Pump Assembly Replacement Parts List RHP

RHP 33 specifications

The Raypak RHP 33 is a high-performance heater designed to meet the needs of both residential and commercial swimming pools and spas. Known for its reliability and energy efficiency, this unit stands out in the market for several reasons.

One of the main features of the RHP 33 is its high-efficiency design. With an output of 333,000 BTUs, it offers rapid heating capabilities, ensuring that your pool or spa reaches the desired temperature quickly, even in cooler climates. The heater is powered by natural gas or propane, giving users flexibility depending on their fuel preferences.

The Raypak RHP 33 incorporates innovative technology that enhances its durability and performance. One notable feature is its durable titanium heat exchanger, which is known for resisting corrosion and ensuring longevity. This is particularly important for those using saltwater pools, as conventional heaters may degrade more quickly in such environments.

The unit also features a built-in digital thermostat that allows for precise temperature control. Users can easily adjust the temperature settings via a user-friendly interface, making it simple to maintain the perfect warmth for leisure activities. The RHP 33 is equipped with an electronic ignition system that provides reliable starts, eliminating the hassle of pilot lights and enhancing safety.

In terms of installation, the Raypak RHP 33 is designed for outdoor use, with a robust housing that protects against the elements. Its compact size allows for versatility in placement without sacrificing performance. Furthermore, the heater’s low NOx emissions technology ensures compliance with environmental regulations, making it an eco-friendly choice for homeowners who are conscious about their ecological footprint.

The RHP 33 also boasts a self-diagnostic system, which provides real-time feedback on its performance and alerts users to potential issues, thereby minimizing downtime. This feature is coupled with easy access to internal components, ensuring straightforward maintenance and repairs when necessary.

In summary, the Raypak RHP 33 is a cutting-edge pool and spa heater that delivers efficiency, reliability, and user-friendly features. With its advanced technologies, including a titanium heat exchanger, digital controls, and environmental compliance, it is an excellent choice for anyone looking to enjoy their water features year-round.
Top Page Image Contents