Makita ML180 manual Maintenance, Accessories

Page 6

ML180

Voltage

Battery cartridge

Operating time

Charger

 

1822

Approx. 190 min.

 

18 V

1833

Approx. 220 min.

DC1801

1834

Approx. 260 min.

 

 

 

1835

Approx. 300 min.

 

Storing battery cartridge

Always charge the Nickel Metal Hydride battery car- tridge before storing it when you do not use it for more than six months.

Head angle (Fig. 3)

The head angle can be adjusted in four stages. Adjust as desired.

Replacing bulb (Fig. 4 & 5)

CAUTION:

The bulb is very hot immediately after operation. Wait until the bulb cools off before attempting to replace it.

First, turn the ring counterclockwise and remove the reflector. Then replace the bulb.

Shoulder strap (Fig. 6)

Install the strap on the tool.

MAINTENANCE

To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The acces- sories or attachments should be used only in the proper and intended manner.

·Bulb set (2 pcs)

·Shoulder strap

·Set plate (For Model ML120)

6

Image 6
Contents ML120/ML140/ML180 Page Symbols SymbolesSímbolos Explanation of general view Important Safety InstructionsRead ALL Instructions Model ML120 ML140 ML180To recycle the battery Operating InstructionsCharging Maintenance AccessoriesConservez CES Instructions Lisez Tout LE Mode DemploiConsignes DE Sécurité Importantes DescriptifMode Demploi Accessoires EntretienGuarde Estas Instrucciones Instrucciones DE Seguridad ImportantesLEA Todas LAS Instrucciones Explicación de los dibujosIntrucciones Para EL Funcionamiento Mantenimiento Accesorios