Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Manual Preset Memory
Manually save a station in preset memory.
q [BAND] | : Select a band. |
w []] or [[] | : Tuning a station. |
e [}] or [{] | : Hold for more than |
| 2 seconds. |
r [}] or [{] | : Select the preset |
| number. |
t [}] or [{] : Hold for more than 2 seconds.
Notes:
¡Frequency setting can be performed even after selecting a preset number. ¡To suspend preset write, press [DISP].
Auto Preset Memory
Automatically save stations with good reception in the preset memory.
q [BAND] | : Select a band. |
w [BAND] | : Hold for more than |
| 2 seconds. |
¡The 6 stations with good reception will be automatically saved in the memory under preset number 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds each.
¡To stop the scanning, press [}] or [{]. (Pressing one of the buttons from [1] to [6] on the remote control also can stop the scanning.)
Note: New stations overwrite existing saved stations after following this procedure.
| Preset Station Calling | |||
q [BAND] | : Select a band. |
|
|
|
|
|
| ||
w [}] or [{] | : Select the preset number for tuning in the preset |
|
|
|
|
|
| ||
|
|
| ||
| station. |
|
|
|
|
|
|
|
|
■To enter preset number directly from the remote control, select a band (Step q above) and press one of the buttons from [1] to [6] on the remote control.
E N G L I S H
6