Installation, Pump mount must | Pentair MPEA, MPRA guide

1.Do not connect system to a high pressure or city water system.

2.Use equipment only in a pool or spa installation.

3.Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing equipment.

Before pressure testing, make the following safety checks:

•	Check all clamps, bolts, lids, and system accessories
	before testing.
•	Release all air in system before testing.
• Water pressure for test must be less than 25 PSI
	(7.5 kg/cm2).
•	Water Temperature for test must be less than 100o F.
	(38o C).
•	Limit test to 24 hours. After test, visually check system
	to be sure it is ready for operation. Remove trap lid and
	retighten hand tight only, see Figure 1.
	NOTICE: These parameters apply to Sta-Rite equipment

RSOW

OAWR

ERNR

TSW

-R

IGB

IASRC

RALG

CDH

Arrows

Tab

Discharge

Port

Figure 1 – Strainer basket cover alignment.

INSTALLATION

Only qualified, licensed personnel should install pump and wiring.

only. For non-Sta-Rite equipment, consult manufacturer.

NOTICE: Do not start the pump until the strainer basket

cover is on and the tab, or rib, on the discharge port

aligns between the arrows.

IMPORTANT SAFETY INSTRUCTIONS

Discharge Port to Filter or Pool

Bonding Lug

Strainer Basket

Cover

Suction

Port

from

Pool or

Vacuum

Filters

Always follow basic safety precautions with this equipment, including the following.

To reduce the risk of injury, do not per- mit children to use this product unless they are closely supervised at all times.

This pump is for use with permanently installed pools and may also be used with hot tubs and spas if so marked. Do not use with storable pools. A permanently installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage. A storable pool is con- structed so that it may be readily disassembled for stor- age and reassembled to its original integrity.

SAVE THESE

INSTRUCTIONS

Pump may be bolted to level

foundation or mounting bracket.

Figure 2

NOTICE: Port threads are: Internal - 2" NPT for direct connec- tion to pipe. External - 3-1/4" Buttress. Fits Sta-Rite U11-200P Union Collar for quick disconnect pipe connection.

See Page 13 for Union Kits.

Pump mount must:

Be located away from corrosive or flammable liquids. Have enough ventilation to maintain air temperature at less than the maximum ambient temperature rating (Max. Amb.) listed on the motor model plate. If this pump is installed in an enclosure/pump house, the enclosure must have ade- quate ventilation and air circulation to keep the tempera- ture in the enclosure at or below the motor’s rated ambient temperature whenever the pump is running.

Be solid - Level - Rigid - Vibration free. (To reduce vibra- tion and pipe stress, bolt pump to mount.)

MPRA, MPEA, MPE specifications

Pentair, a global leader in water solutions, has introduced a range of innovative products, including the MPRA, MPEA, and MPE. These advanced models are tailored for various applications, providing efficient and reliable performance in water management systems. Their design focuses on sustainability, ease of use, and operational efficiency, making them essential components for both residential and commercial purposes.

The Pentair MPRA (Multi-Phase Regulating Assembly) stands out for its versatility, allowing it to integrate seamlessly into existing setups. The MPRA is designed to manage pressure dynamics effectively, ensuring that water delivery remains stable even during peak usage periods. This model incorporates advanced pressure regulation technology, which minimizes water waste and promotes energy savings. With a robust construction, the MPRA is durable and can withstand harsh environmental conditions, making it ideal for low and high-demand applications.

The MPEA (Multi-Phase Energy Assembly) takes efficiency to the next level by combining energy management with advanced filtration capabilities. This model employs state-of-the-art technologies to optimize energy consumption while providing high-quality water. The MPEA features an innovative control system that monitors energy usage in real time, allowing users to adjust settings for maximum efficiency. Its smart design and easy integration with existing infrastructure make it a preferred choice for environmentally conscious consumers looking to reduce their carbon footprint.

The MPE (Multi-Phase Enhancement) model is specifically designed for enhancing water quality in various systems. This model utilizes cutting-edge filtration technology, which effectively removes contaminants from water while improving its taste and clarity. The MPE provides users with greater control over water quality parameters, facilitating healthier water usage in household and industrial applications. The compact size of the MPE makes it suitable for installations with limited space, without compromising performance.

In summary, Pentair's MPRA, MPEA, and MPE models reflect the company's commitment to innovation and sustainability in water management solutions. Equipped with advanced technologies, these products not only enhance efficiency but also contribute to a cleaner and safer environment. Their diverse applications make them suitable for a wide range of users, addressing the increasing demand for efficient water solutions in today’s world. Each model represents a step forward in Pentair's mission to deliver exceptional water quality while promoting responsible water use.