GE ABN12 operating instructions Window stool

Page 11

,

Center the case in the window. Lower the window until it touches

behind the air conditioner

top rail. Make sure the bottom rail is behind the window stool.

4 Attach the support brackets to the bottom of the case with 1/2” screws, 2 on each side.

2 Locate the 3 holes that are on the plate at the front of the case. Drill 1/8” pilot holes. Using 3 1“ screws attach the case to the

window stool.

3 Assemble the 2 leveling bolts

and nuts to the support brackets.

5 On the outside, turn the leveling bolts until each one makes contact with the wall. Make sure the back of the case tilts 1/4” to 3/8” lower than the front. Tighten the nuts.

ACAUTION:

●Use a wood block between the leve/ing bolts and the wall if the outside wall is weak or if the weight of the air conditioner falls between the studs in the wall.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Air Conditioner Write down the model and serial Start Hme/...Before usingyour air conditionerFor Propergrounding Groundthe outlet throughthe house wiringHigh Cool MED COOLand LOW COOLprovide Controls On your Azr Conditioner~Select MED COOLwith Select HIGHCOOLwith Select LOWCOOLwith To use the fan setting on Mode controlBefore replacing it Care & CleaningToreplace the grille insert Toremove the frontgrille insert30 Amp CAUT/ONBeforeyou bepn WIDTH2 40!4Read completelythenfollow ste~-by-ste~ Window stool Installationwithout Fillerpanels Top to the wooden frame Through-the-Wall InstallationPage \\I DripCOOLwith the temp at 1 or Box and replace fuse or reset the breakerAir conditioner Turn the knob to a higher number Page Page North Wacker Drive Chicago, IL TDD GE-CARESPub.No.49-7349 BT14933-167

ABN12 specifications

The GE ABN12 is an advanced air-insulated medium-voltage switchgear that showcases a robust and innovative design suited for a variety of industrial and utility applications. This switchgear is notable for its ability to meet the increasing demands of modern electrical infrastructure by offering reliability, safety, and performance.

One of the main features of the GE ABN12 is its modular design, which allows for flexibility in configuration and installation. This switchgear is built to accommodate varying system requirements and can be customized to fit specific applications. The compact design not only saves space but also simplifies the installation process, making it an ideal choice for facilities with limited room.

The GE ABN12 utilizes advanced vacuum circuit breaker technology, which enhances performance and reduces maintenance needs. Vacuum circuit breakers minimize the risk of electrical explosions and are known for their reliable operation even in harsh environments. This contributes to increased safety for personnel as well as reduced downtime for operations.

In terms of electrical characteristics, the GE ABN12 is designed to handle medium-voltage applications with voltage ratings typically up to 12 kV and current ratings that can go as high as 630 A. The switchgear is capable of operating under various load conditions, providing users with confidence in its ability to manage substantial electrical loads.

Another key technology embedded within the GE ABN12 is its intelligent protection system. This advanced feature enables real-time monitoring and diagnostics, allowing operators to swiftly identify and address operational issues. Such predictive maintenance capabilities enhance reliability and contribute to prolonged equipment lifespan.

The GE ABN12 also emphasizes safety through comprehensive features that include a tested and proven interlocking mechanism. This mechanism prevents unauthorized access to live parts, ensuring that maintenance personnel can work safely. Additionally, the switchgear incorporates grounding systems that further reduce the risk of electrical hazards.

Environmental considerations are a hallmark of the GE ABN12 as well. With a commitment to sustainability, the switchgear is designed to operate efficiently while minimizing its environmental footprint. The use of innovative materials and eco-friendly design criteria ensures that the GE ABN12 aligns with modern environmental standards.

In conclusion, the GE ABN12 is a cutting-edge solution in medium-voltage switchgear technology, characterized by its modularity, advanced protection features, and commitment to safety and sustainability. Ideal for a range of applications, it provides essential reliability and efficiency, making it a top choice for industries looking to enhance their electrical infrastructure.
Top Page Image Contents