Cooling Your Room

You must select the COOL mode if you wish to adjust the :

◆Cooling temperature

◆Fan speed when cooling

1 If necessary, press (ON/OFF) button.

Result: ◆ The On/Off indicator on the receiver & display unit comes on.

◆ The air conditioner runs in the mode selected when the unit was last used.

◆The receiver & display unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆ Plugged in ◆ Stopped

lt will start up normally after three minutes.

2To select the COOL mode, press the Mode button until is displayed at the top of the wireless remote controller.

Result: ◆ The receiver & display unit beeps.

◆ The air conditioner runs in COOL mode.

Note You can change modes at any time.

3To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive.

Result: ◆ Each time you press Temperature buttons: - The temperature is adjusted by 1OC.

- The receiver & display unit beeps.

◆ The air conditioner starts cooling, provided that the room

◆ temperature is higher than the selected temperature ; the fan ◆ will, however, operate.

4Select the fan speed by pressing the Fan button one or more times until the intended value is displayed :

Automatic(rotated : ➔ ➔ )